Customization: | Available |
---|---|
Output Type: | Single |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model: IPS-ATDP1000-0.6 1000VDC 0.6A 600W High Voltage DC Power Supply
1 | 19 inch 2U standard chassis, user can choose desktop or rack type |
2 | Constant voltage and constant current function |
3 | Low ripple and high stability |
4 | Continuous adjustable output voltage and current |
5 | Digital adjustment of encoder to make the adjustment more precise |
6 | Adopting PSFB-ZVS switching mode with high conversion efficiency |
7 | Over-voltage, Overheat and Over-voltage Protection of Electric Power Input |
8 | LAN and RS485/RS422 communication interface |
9 | MODBUS-RTU Standard Communication Protocol |
10 | Monitoring by computer software |
11 | Parameters can be calibrated by software |
12 | Local and Program Controlled Dual Operation Mode |
13 | Output rated power 600W |
14 | Various models of rated voltage 1000V~12KV and rated current 0.1A-1.2A are available. |
Front Panel |
1 | Power Open Switch | |||
2 | Key Function Analysis | FINE-Voltage and Current Rough and Fine Adjustment Selection Key; | ||
LIMI-Voltage and Current Preset Display Key; | ||||
OVP-SET-Over-voltage Setting Value Key; | ||||
LOCK-Power panel lock button; | ||||
REM-Programmable disconnection and long press address setting button; | ||||
OUT-power output control button; | ||||
3 | Analysis of State Indicator | FINE -Voltage and Current Fine Selection Indicator Light for Fine Adjustment; | ||
LIMIT -Voltage and Current Preset Display Indicator, turn on as preset value; | ||||
OVP-SET-Over-voltage setting indicator light to display the over-voltage setting value; | ||||
ACF-Input over-voltage indicator light, turn on input over-voltage; | ||||
OTP-Temperature Protection Indicator Light for Internal Temperature Protection of Power Supply; | ||||
OVP - Over-voltage Indicator, turn on the power output over-voltage; | ||||
LOCK - Power Lock Indicator light, power is locked; | ||||
REM - Programmable Indicator Light, which is programmed for power supply; | ||||
OUT - Output status indicator, turn on for power supply; | ||||
CV - constant voltage indicator lamp, power supply is in constant voltage state; | ||||
4 | Adjustment area | V-SET - Output Voltage Knob; | ||
I-SET - Output Constant Current Knob. | ||||
5 | Output voltage measurement terminal | Red - output positive; black - output negative. (The power supply in this series is not connected internally and can not be used.High voltage power supply no this interface) | ||
6 | Digital display | Including voltage display area and current display area. | ||
Back Panel | ||||
1 | RS-485/RS-422 Communication Interface | LAN Communication Interface | ||
2 | Output Terminal | Cooling window | ||
3 | AC NPUT PORT |
TECHNICAL SPECIFICATIONS | ||||
Model | IPS-ATDP1000-0.6 | |||
Rated value |
Voltage(Empty Load) | 0~1000VDC | ||
Current | 0~0.6A | |||
Over-voltage protection | 0~1100V | |||
Setting resolution |
Over-Voltage | 0.1V | ||
Voltage | 0.1V | |||
Current | 0.1mA | |||
Display resolution |
Voltage | 0.1V | ||
Current | 0.1mA | |||
Display Value Accuracy |
Voltage | ≤0.1%+2LSB | ||
Current | ≤0.5%+2LSB | |||
Load regulation rate | Voltage | ≤0.5%+2LSB | ||
Current | ≤1%+2LSB | |||
Power regulation rate |
Voltage | ≤0.5%+2LSB | ||
Current | ≤1%+2LSB | |||
Ripple (RMS) | Voltage | ≤1‰ | ||
Size(MM) | 520L*482W*88H | |||
ENVIRONMENTAL PARAMETERS | ||||
1 | AC INPUT | 220VAC (+10% 47Hz-63Hz) | ||
2 | Heat dissipation mode | forced heat dissipation by fan | ||
3 | Operating ambient temperature | 0-40 C | ||
4 | Storage ambient temperature | -20-70 C | ||
5 | Maximum ambient humidity for indoor use design | 95% |
IPS-ATDP12-50 | 220VAC +10% | 12V 50A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP15-40 | 220VAC +10% | 15V 40A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP20-30 | 220VAC +10% | 20A 30A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP30-20 | 220VAC +10% | 30V 20A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP40-15 | 220VAC +10% | 40V 15A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP60-10 | 220VAC +10% | 60V 10A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP100-6 | 220VAC +10% | 100V 6A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP150-4 | 220VAC +10% | 150V4A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP200-3 | 220VAC +10% | 200V 3A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP300-2 | 220VAC +10% | 300V 2A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP400-1.5 | 220VAC +10% | 400V 1.5A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP500-1.2 | 220VAC +10% | 500V 1.2A | 600W | LAN & RS485/RS422 | 340L*213W*88H | 7KG/9KG |
IPS-ATDP1200-0.5 | 220VAC +10% | 1200V-500mA | 600W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
IPS-ATDP1500-0.4 | 220VAC +10% | 1500V-400mA | 600W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
IPS-ATDP2000-0.3 | 220VAC +10% | 2000V-300mA | 600W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
IPS-ATDP3000-0.2 | 220VAC +10% | 3000V-200mA | 600W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
IPS-ATDP4000-0.15 | 220VAC +10% | 4000V-150mA | 600W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
IPS-ATDP5000-0.12 | 220VAC +10% | 5000V-120mA | 600W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
IPS-ATDP6000-0.1 | 220VAC +10% | 6000V-100mA | 600W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
IPS-ATDP8000-0.075 | 220VAC +10% | 8000V-75mA | 600W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
IPS-ATDP10000-0.06 | 220VAC +10% | 10000V-60mA | 600W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |