| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1 | The high voltage DC power supply is a kind of DC constant voltage and constant current high voltage power supply with continuously adjustable. |
| 2 | The maximum rated voltage of this series of power supply can reach <200KV and its performance are excellent in the same type of products. |
| 3 | In addition, the power supply adds remote control and detection function on the basis of local operation, which greatly improves the flexibility of the power supply product and its wide application. |
| 4 | This series of power supplies can be widely used in various electronic components aging systems, various testing instruments and electronic application laboratories, and other fields. |
| 5 | Other application: Electrostatic spinning equipment, electrostatic flocking, electrostatic spraying, electrostatic sorter, melt blown cloth to increase filtering efficiency, melt blown cloth to add static electricity, super capacitor charging, |
| 1 | 19 inch 2U standard chassis, user can choose desktop or rack type |
| 2 | Constant voltage and constant current function |
| 3 | Low ripple and high stability |
| 4 | Continuous adjustable output voltage and current |
| 5 | Digital adjustment of encoder to make the adjustment more precise |
| 6 | Adopting PSFB-ZVS switching mode with high conversion efficiency |
| 7 | Overvoltage, Overheat and Overvoltage Protection of Electric Power Input |
| 8 | LAN and RS485/RS422 communication interface |
| 9 | MODBUS-RTU Standard Communication Protocol |
| 10 | Monitoring by computer software |
| 11 | Parameters can be calibrated by software |
| 12 | Local and Program Controlled Dual Operation Mode |
| 13 | Output rated power 600W or 1200W |
| 14 | Various models of rated voltage 1000V~12KV and rated current 0.1A-1.2A are available. |
| Model | IPS-ATDP6KV-200mA | |
Rated value |
Voltage(Empty Load) | 0~-6000VDC |
| Current | 0~200mA | |
| Over-voltage protection | 0~6600V | |
Setting resolution |
Over-Voltage | 0.1VDC |
| Voltage | 0.1VDC | |
| Current | 0.1mA | |
| Display resolution | Voltage | 0.1VDC |
| Current | 0.1mA | |
| Display Value Accuracy | Voltage | ≤0.1%+2LSB |
| Current | ≤0.5%+2LSB | |
| Load regulation rate | Voltage | ≤0.5%+2LSB |
| Current | ≤1%+2LSB | |
| Power regulation rate | Voltage | ≤0.5%+2LSB |
| Current | ≤1%+2LSB | |
| Ripple (RMS) | Voltage | ≤1‰ |
| Size(MM) | 520L*482W*88H(MM) | |
| 1 | AC INPUT | 220VAC (+10% 47Hz-63Hz) |
| 2 | Heat dissipation mode | forced heat dissipation by fan |
| 3 | Operating ambient temperature | 0-40 C |
| 4 | Storage ambient temperature | -20-70 C |
| 5 | Maximum ambient humidity for indoor use design | 95% |
| Front Panel |
|
| Front Panel | ||
| 1 | Power Open Switch | |
| 2 | Key Function Analysis | FINE-Voltage and Current Rough and Fine Adjustment Selection Key; |
| LIMI-Voltage and Current Preset Display Key; | ||
| OVP-SET-Over-voltage Setting Value Key; | ||
| LOCK-Power panel lock button; | ||
| REM-Programmable disconnection and long press address setting button; | ||
| OUT-power output control button; | ||
| 3 | Analysis of State Indicator | FINE -Voltage and Current Fine Selection Indicator Light for Fine Adjustment; |
| LIMIT -Voltage and Current Preset Display Indicator, turn on as preset value; | ||
| OVP-SET-Over-voltage setting indicator light to display the over-voltage setting value; | ||
| ACF-Input over-voltage indicator light, turn on input over-voltage; | ||
| OTP-Temperature Protection Indicator Light for Internal Temperature Protection of Power Supply; | ||
| OVP - Over-voltage Indicator, turn on the power output over-voltage; | ||
| LOCK - Power Lock Indicator light, power is locked; | ||
| REM - Programmable Indicator Light, which is programmed for power supply; | ||
| OUT - Output status indicator, turn on for power supply; | ||
| CV - constant voltage indicator lamp, power supply is in constant voltage state; | ||
| 4 | Adjustment area |
V-SET - Output Voltage Knob; |
| I-SET - Output Constant Current Knob. | ||
| 5 | Output voltage measurement terminal | Red - output positive; black - output negative. (The power supply in this series is not connected internally and can not be used) |
| 6 | Digital display are | Including voltage display area and current display area. |
| Back Panel |
|
|
|
| Back Panel | |||
| 1 | RS-485/RS-422 Communication Interface | 2 | LAN Communication Interface |
| 3 | Output Terminal | 5 | Cooling window |
| 5 | AC NPUT PORT | ||
){kind=link}