| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1 | 19 inch 2U standard chassis, user can choose desktop or rack type |
| 2 | Constant voltage and constant current function |
| 3 | Low ripple and high stability |
| 4 | Continuous adjustable output voltage and current |
| 5 | Digital adjustment of encoder to make the adjustment more precise |
| 6 | Adopting PSFB-ZVS switching mode with high conversion efficiency |
| 7 | Over-voltage, Overheat and Over-voltage Protection of Electric Power Input |
| 8 | LAN and RS485/RS422 communication interface |
| 9 | MODBUS-RTU Standard Communication Protocol |
| 10 | Monitoring by computer software |
| 11 | Parameters can be calibrated by software |
| 12 | Local and Program Controlled Dual Operation Mode |
| 13 | Output rated power 600W or 1200W |
| 14 | Various models of rated voltage 1000V~12KV and rated current 0.1A-1.2A are available. |
| Power Open Switch | ||
| Key Function Analysis | FINE-Voltage and Current Rough and Fine Adjustment Selection Key; | |
| LIMI-Voltage and Current Preset Display Key; | ||
| OVP-SET-Over-voltage Setting Value Key; | ||
| LOCK-Power panel lock button; | ||
| REM-Programmable disconnection and long press address setting button; | ||
| OUT-power output control button; | ||
| Analysis of State Indicator | FINE -Voltage and Current Fine Selection Indicator Light for Fine Adjustment; | |
| LIMIT -Voltage and Current Preset Display Indicator, turn on as preset value; | ||
| OVP-SET-Over-voltage setting indicator light to display the over-voltage setting value; | ||
| ACF-Input over-voltage indicator light, turn on input over-voltage; | ||
| OTP-Temperature Protection Indicator Light for Internal Temperature Protection of Power Supply; | ||
| OVP - Over-voltage Indicator, turn on the power output over-voltage; | ||
| LOCK - Power Lock Indicator light, power is locked; | ||
| REM - Programmable Indicator Light, which is programmed for power supply; | ||
| OUT - Output status indicator, turn on for power supply; | ||
| CV - constant voltage indicator lamp, power supply is in constant voltage state; | ||
| Adjustment area | V-SET - Output Voltage Knob; | |
| I-SET - Output Constant Current Knob. | ||
| Output voltage measurement terminal | Red - output positive; black - output negative. (The power supply in this series is not connected internally and can not be used.High voltage power supply no this interface) | |
| Digital display | Including voltage display area and current display area. | |
| TECHNICAL SPECIFICATIONS | ||
| Model | IPS-ATDP15-40 | |
| Rated value |
Voltage(Empty Load) | 0~15VDC |
| Current | 0~40KmA | |
| Over-voltage protection | 0~16.5V | |
| Setting resolution |
Over-Voltage | 0.1V |
| Voltage | 0.1V | |
| Current | 0.1mA | |
| Display resolution |
Voltage | 0.1V |
| Current | 0.1mA | |
| Display Value Accuracy |
Voltage | ≤0.1%+2LSB |
| Current | ≤0.5%+2LSB | |
| Load regulation rate | Voltage | ≤0.5%+2LSB |
| Current | ≤1%+2LSB | |
| Power regulation rate |
Voltage | ≤0.5%+2LSB |
| Current | ≤1%+2LSB | |
| Ripple (RMS) | Voltage | ≤1‰ |
| Size(MM) | 340L*213W*88H | |
| ENVIRONMENTAL PARAMETERS | ||
| 1 | AC INPUT | 220VAC (+10% 47Hz-63Hz) |
| 2 | Heat dissipation mode | forced heat dissipation by fan |
| 3 | Operating ambient temperature | 0-40 C |
| 4 | Storage ambient temperature | -20-70 C |
| 5 | Maximum ambient humidity for indoor use design | 95% |
){kind=link}