Customization: | Available |
---|---|
Application: | High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer |
Output Type: | Single |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1. IPS-APS-270 Series is designed to give continuous high-quality DC power.
2. This continuous high power model is ideal for crew training, aircraft servicing in workshops, on the ramp, or in the field, diagnostic work, pre-flight checks, charging the onboard battery, or for continuous powering of equipment during operations, without draining the onboard aircraft batteries.
3. The safety features include Over Voltage, Overload, and Internal Thermal, Short Circuit protection. The power modules conform to EMC standards for noise emissions and immunity
PERFORMANCE CHARACTERISTICS
1. Robust metal cabinet housing
2. Compact size
3. Fixed or Mobile are available
4. Low ripple content ≤ 150mV (RMS)
5. Self diagnose and alarm
6. Complete protection
SPECIFICATION
Capacity |
30A~800A |
INPUT |
|
Voltage |
#1: 1 phase 120VAC±20%, |
#2: 1 phase 220VC±20% , |
|
#3: 3 phases 127VAC/220VAC±20%, |
|
#4: 3 phases 220VAC/380VAC±20% |
|
#5: Or as per your specific requirement(select one individual voltage) |
|
Frequency |
40~70Hz(optional 400Hz) |
Power Factor |
≥0.8 (Standard Type) |
OUTPUT |
|
Voltage |
DC270V(32-270V) |
DC270V |
|
Per your requirement(select one individual voltage) |
|
Current |
30~800A |
Voltage Regulation |
+/-0.5V |
Voltage Ripple |
300mV or less than 1V |
Overload Protection |
110% 15Mins,125% 300S,150% 30S |
Over/under voltage,Over current,Over load,Over temperature,Short circuit |
|
Self diagnose and alarm |
|
Available Options |
RS232/485 com port, Tow bar for wheeled version, Multiple Output |
Display |
Voltage, Current |
Working condition |
Temperature:-10 to 40ºC,Humidity:0-95%,Noise:< 65dB within 1M,IP20/IP32/IP55,Altitude<1800m |
Reliability |
Mean Time Between Failure(MTBF) 50,000H |
Mean time to restoration(MTTR)< 30 min |
|
Standards |
DFS400//ISO 6858/MH/T6018/MIL-STD-704/EN62040-1-1/ EN61000 |
Model List Ground Power Unit
(DC28V 0-33V)Nominal Voltage: 28.5VDC | |||||
NO | Model | INPUT (VAC) | OUTPUT VDC |
OUTPUT (AMPS) |
CAPACITY (WATTS) |
1 | IPS-ATDA28.5-50 | Single phase 220VAC 50Hz/60Hz | 0~28.5VDC | 0-50A | 1425 |
2 | IPS-ATDA28.5-100 | Single phase 220VAC 50Hz/60Hz | 0~28.5VDC | 0-100A | 2850 |
3 | IPS-ATDA28.5-200 | Single phase 220VAC 50Hz/60Hz | 0~28.5VDC | 0-200A | 5700 |
4 | IPS-ATDA28.5-400 | 3 phases 380VAC 50Hz/60Hz | 0~28.5VDC | 0-400A | 14250 |
5 | IPS-ATDA28.5-500 | 3 phases 380VAC 50Hz/60Hz | 0~28.5VDC | 0-500A | 14250 |
6 | IPS-ATDA28.5-600 | 3 phases 380VAC 50Hz/60Hz | 0~28.5VDC | 0-600A | 17100 |
7 | IPS-ATDA28.5-800 | 3 phases 380VAC 50Hz/60Hz | 0~28.5VDC | 0-800A | 22800 |
8 | IPS-ATDA28.5-1000 | 3 phases 380VAC 50Hz/60Hz | 0~28.5VDC | 0-1000A | 28500 |
9 | IPS-ATDA28.5-1200 | 3 phases 380VAC 50Hz/60Hz | 0~28.5VDC | 0-1200A | 34200 |
10 | IPS-ATDA28.5-1500 | 3 phases 380VAC 50Hz/60Hz | 0~28.5VDC | 0-1500A | 42750 |
11 | IPS-ATDA28.5-1800 | 3 phases 380VAC 50Hz/60Hz | 0~28.5VDC | 0-1800A | 51300 |
12 | IPS-ATDA28.5-2000 | 3 phases 380VAC 50Hz/60Hz | 0~28.5VDC | 0-2000A | 57000 |
(DC270V 0-330V) Nominal Voltage: 270VDC | |||||
NO | Model | INPUT (VAC) | OUTPUT VDC |
OUTPUT (AMPS) |
CAPACITY (WATTS) |
13 | IPS-ATDA270-30 | 3 phases 380VAC 50Hz/60Hz | 0~270VDC | 0-30A | 8100 |
14 | IPS-ATDA270-50 | 3 phases 380VAC 50Hz/60Hz | 0~270VDC | 0-50A | 13500 |
15 | IPS-ATDA270-100 | 3 phases 380VAC 50Hz/60Hz | 0~270VDC | 0-100A | 27000 |
16 | IPS-ATDA270-150 | 3 phases 380VAC 50Hz/60Hz | 0~270VDC | 0-150A | 40500 |
17 | IPS-ATDA270-200 | 3 phases 380VAC 50Hz/60Hz | 0~270VDC | 0-200A | 54000 |
18 | IPS-ATDA270-300 | 3 phases 380VAC 50Hz/60Hz | 0~270VDC | 0-300A | 81000 |
19 | IPS-ATDA270-500 | 3 phases 380VAC 50Hz/60Hz | 0~270VDC | 0-500A | 135000 |
20 | IPS-ATDA270-800 | 3 phases 380VAC 50Hz/60Hz | 0~270VDC | 0-800A | 216000 |