Three-in-one simple electrostatic spinning module device 30KV 50KV 0.5mA for power supply roller injection pump
I. INTRODUCTION & APPLICATION
| 1 |
HV series are high voltage DC power supplies, available from 10kV to 200kV output. |
| 2 |
Output control can be switched between Remote control and Local control. Output displays and output indicators are direct on the front panels and can lead to the external remote display screen. |
| 3 |
The high-voltage output terminal has over-current, over-current, short-circuit protection, and arc protection. |
| 4 |
The HV series high voltage power supply is widely used in electrostatic applications, such as Electrostatic dust removal, Electrostatic spinning, Electrostatic electret, Electrostatic separation, Electrostatic spraying, and Electrostatic flocking. |
| 5 |
The HV series high voltage power supply can also be used in High voltage insulation tests, Material sorting, Metal vaporization, High voltage deburring, and Laboratory tests. |
| 6 |
Meltblown cloth electrostatic electret equipment |
| 7 |
Electrostatic Spinning |
| 8 |
Electrostatic Dust Removal |
| 9 |
Capacitor Charge |
| 10 |
Discharge |
| 11 |
Cable Aging Test |
| 12 |
Cable Leakage Test |
| 13 |
Optical Fiber Withstand Voltage Test |
| 14 |
Etc |
II. PRODUCT FEATURES
| 1 |
Output voltage full range adjustable |
| 2 |
High voltage Positive output +10kV to +200kV |
| 3 |
High voltage Negative output -10kV to -200kV |
| 4 |
4 digits LED display for voltage and current |
| 5 |
Low EMI, strong anti-interference ability |
| 6 |
OVP, OCP, ARC, and short circuit protections |
III. OPTIONAL INTERFACE
| 1 |
Remote ON/OFF control |
| 2 |
0-10V analog control for voltage and current output |
| 3 |
RS485, support Modbus-RTU commands |
| 4 |
RS232, support Modbus-RTU commands |
IV. INPUT VOLTAGE
| Rate Voltage |
Single phase 220VAC |
| Range Voltage |
220VAC±10% |
| Frequency |
50/60HZ |
V. OUTPUT
| Brand |
IDEALPLUSING |
| Model |
IPS-ATDJ30KV-1mA |
| Rated Voltage |
30VDC(Full range adjustable) |
| Rated Current |
1mA(Full range adjustable) (except 1mA models) |
| Line Regulation |
CV≤0.1%FS |
| Load Regulation |
CV≤0.1%FS |
| Ripple & Noise |
≤0.5% FS |
| High Voltage stability |
≤0.1% per hour after warm-up for one hour |
| Temperature co-efficiency |
100ppm/°C |
VI. DISPLAY
| Meter |
4 digits LED display for voltage and current |
| Display Resolution |
Voltage |
0.01kV / 0.1kV |
| Current |
0.001mA / 0.01mA |
| Display Accuracy |
Voltage |
≤0.1%FS+2LSB |
| Current |
≤0.1%FS+2LSB |
VII. PROTECTION
| Over Voltage Protection (O.V.P.) |
Built-in OVP protection with limit of 105% rated output voltage.
The output will be shut down when OVP is activated. |
| Over Current Protection (O.C.P.) |
Built-in OCP protection with limit of 105% rated output voltage.
The output will be shut down when OCP is activated. |
| Over Temperature Protection (O.T.P.) |
Built-in OTP protection with heat sink temperature limit of 65°C±5°C
The output will be shut down when OTP is activated. |
| Short Circuit Protection |
The output will be shut down when short circuit protection is activated. |
VIII. GENERAL
| Dimension of HV power supply |
376L*367W*110H(MM) |
| Net Weight/Gross Weight |
4KG/5KG(Carton box package) |
| Cooling method |
Cooling fan |
| Operating environment |
0°C~40°C, 10%~80%RH |
| Storage environment |
-20°C~70°C, 10%~90%RH |
IX. HIGH-VOLTAGE OUTPUT CABLE (TWO KINDS ARE OPTIONAL)
| 1 |
Self-contained high voltage cable without shielding. The standard high-voltage cable length is 1.5 meters, other lengths are optional. |
| 2 |
High-voltage cable with shielding. The standard high-voltage cable length is 1.5 meters, other lengths are optional. |
X. REFERENCE PICTURES
INSTALLATION & NOTES
This product is a high voltage power supply. Please be sure to operate it correctly and take safety precautions, otherwise, electric shock accidents and property damage may occur. Please read the following precautions carefully.
| 1 |
Place the power supply on a horizontal surface for use. |
| 2 |
Ensure that the power supply is reliably earthed before use. |
| 3 |
Please keep the output of the power supply at a certain insulating distance from the surrounding components to avoid discharge. |
| 4 |
To ensure reliable operation of the product without overheating and high temperatures, blocking and covering the ventilation holes and keeping away from heat sources are strictly prohibited. |
| 5 |
The use of the power supply should be avoided in dusty or humid environments, otherwise, the insulation will be reduced and partial discharge will occur. |
| 5 |
It is strictly forbidden to disassemble and repair the high-voltage power supply to avoid personal injury and economic loss caused by high-voltage power supply failure. |
| 6 |
It is strictly forbidden to operate or repair the internal circuit of the high-voltage power supply with electricity, as dangerous or even fatal voltages can be generated inside the power supply. |
| 7 |
Do not touch the high voltage connectors unless the load and the capacitors inside the power supply have been completely discharged after switching off the high voltage power supply. |
| 8 |
It is strictly forbidden to insert other objects into the ventilation holes of the equipment to avoid accidental contact with the circuit, short-circuiting, causing fire or electric shock. |
IV. MODEL SELECTION
| 1KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL1-10 |
1KV |
10mA |
10W |
| #2 |
IPS-ATDWSDL1-30 |
1KV |
30mA |
30W |
| #3 |
IPS-ATDWSDL1-60 |
1KV |
60mA |
60W |
| #4 |
IPS-ATDWSDL1-100 |
1KV |
100mA |
100W |
| #5 |
IPS-ATDWSDL1-150 |
1KV |
150mA |
150W |
| #6 |
IPS-ATDWSDL1-300 |
1KV |
300mA |
300W |
| #7 |
IPS-ATDWSDL1-600 |
1KV |
600mA |
600W |
| #8 |
IPS-ATDWSDL1-1200 |
1KV |
1200mA |
1200W |
| 2KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL2-5 |
2KV |
5mA |
10W |
| #2 |
IPS-ATDWSDL2-15 |
2KV |
15mA |
30W |
| #3 |
IPS-ATDWSDL2-30 |
2KV |
30mA |
60W |
| #4 |
IPS-ATDWSDL2-50 |
2KV |
50mA |
100W |
| #5 |
IPS-ATDWSDL2-75 |
2KV |
75mA |
150W |
| #6 |
IPS-ATDWSDL2-150 |
2KV |
150mA |
300W |
| #7 |
IPS-ATDWSDL2-300 |
2KV |
300mA |
600W |
| #8 |
IPS-ATDWSDL2-600 |
2KV |
600mA |
1200W |
| 3KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL3-3.33 |
3KV |
3.33mA |
10W |
| #2 |
IPS-ATDWSDL3-10 |
3KV |
10mA |
30W |
| #3 |
IPS-ATDWSDL3-20 |
3KV |
20mA |
60W |
| #4 |
IPS-ATDWSDL3-33.3 |
3KV |
33.3mA |
100W |
| #5 |
IPS-ATDWSDL3-50 |
3KV |
50mA |
150W |
| #6 |
IPS-ATDWSDL3-100 |
3KV |
100mA |
300W |
| #7 |
IPS-ATDWSDL3-200 |
3KV |
200mA |
600W |
| #8 |
IPS-ATDWSDL3-400 |
3KV |
400mA |
1200W |
| 6KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL6-1.67 |
6KV |
1.67mA |
10W |
| #2 |
IPS-ATDWSDL6-5 |
6KV |
5mA |
30W |
| #3 |
IPS-ATDWSDL6-10 |
6KV |
10mA |
60W |
| #4 |
IPS-ATDWSDL6-16.7 |
6KV |
16.7mA |
100W |
| #5 |
IPS-ATDWSDL6-25 |
6KV |
25mA |
150W |
| #6 |
IPS-ATDWSDL6-50 |
6KV |
50mA |
300W |
| #7 |
IPS-ATDWSDL6-100 |
6KV |
100mA |
600W |
| #8 |
IPS-ATDWSDL6-200 |
6KV |
200mA |
1200W |
| 8KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL8-1.25 |
8KV |
1.25mA |
10W |
| #2 |
IPS-ATDWSDL8-3.75 |
8KV |
3.75mA |
30W |
| #3 |
IPS-ATDWSDL8-7.5 |
8KV |
7.5mA |
60W |
| #4 |
IPS-ATDWSDL8-12.5 |
8KV |
12.5mA |
100W |
| #5 |
IPS-ATDWSDL8-18.8 |
8KV |
18.8mA |
150W |
| #6 |
IPS-ATDWSDL8-37.5 |
8KV |
37.5mA |
300W |
| #7 |
IPS-ATDWSDL8-75 |
8KV |
75mA |
600W |
| #8 |
IPS-ATDWSDL8-150 |
8KV |
150mA |
1200W |
| 10KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL10-1 |
10KV |
1mA |
10W |
| #2 |
IPS-ATDWSDL10-3 |
10KV |
3mA |
30W |
| #3 |
IPS-ATDWSDL10-6 |
10KV |
6mA |
60W |
| #4 |
IPS-ATDWSDL10-10 |
10KV |
10mA |
100W |
| #5 |
IPS-ATDWSDL10-15 |
10KV |
15mA |
150W |
| #6 |
IPS-ATDWSDL10-30 |
10KV |
30mA |
300W |
| #7 |
IPS-ATDWSDL10-60 |
10KV |
60mA |
600W |
| #8 |
IPS-ATDWSDL10-120 |
10KV |
120mA |
1200W |
| 15KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL15-0.67 |
15KV |
0.67mA |
10W |
| #2 |
IPS-ATDWSDL15-2 |
15KV |
2mA |
30W |
| #3 |
IPS-ATDWSDL15-4 |
15KV |
4mA |
60W |
| #4 |
IPS-ATDWSDL15-6.67 |
15KV |
6.67mA |
100W |
| #5 |
IPS-ATDWSDL15-10 |
15KV |
10mA |
150W |
| #6 |
IPS-ATDWSDL15-20 |
15KV |
20mA |
300W |
| #7 |
IPS-ATDWSDL15-40 |
15KV |
40mA |
600W |
| #8 |
IPS-ATDWSDL15-80 |
15KV |
80mA |
1200W |
| 20KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL20-0.5 |
20KV |
0.5mA |
10W |
| #2 |
IPS-ATDWSDL20-1.5 |
20KV |
1.5mA |
30W |
| #3 |
IPS-ATDWSDL20-3 |
20KV |
3mA |
60W |
| #4 |
IPS-ATDWSDL20-5 |
20KV |
5mA |
100W |
| #5 |
IPS-ATDWSDL20-7.5 |
20KV |
7.5mA |
150W |
| #6 |
IPS-ATDWSDL20-15 |
20KV |
15mA |
300W |
| #7 |
IPS-ATDWSDL20-30 |
20KV |
30mA |
600W |
| #8 |
IPS-ATDWSDL20-60 |
20KV |
60mA |
1200W |
| 30KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL30-0.33 |
30KV |
0.33mA |
10W |
| #2 |
IPS-ATDWSDL30-1 |
30KV |
1mA |
30W |
| #3 |
IPS-ATDWSDL30-2 |
30KV |
2mA |
60W |
| #4 |
IPS-ATDWSDL30-3.33 |
30KV |
3.33mA |
100W |
| #5 |
IPS-ATDWSDL30-5 |
30KV |
5mA |
150W |
| #6 |
IPS-ATDWSDL30-10 |
30KV |
10mA |
300W |
| #7 |
IPS-ATDWSDL30-20 |
30KV |
20mA |
600W |
| #8 |
IPS-ATDWSDL30-40 |
30KV |
40mA |
1200W |
| 40KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL40-0.25 |
40KV |
0.25mA |
10W |
| #2 |
IPS-ATDWSDL40-0.75 |
40KV |
0.75mA |
30W |
| #3 |
IPS-ATDWSDL40-1.5 |
40KV |
1.5mA |
60W |
| #4 |
IPS-ATDWSDL40-2.5 |
40KV |
2.5mA |
100W |
| #5 |
IPS-ATDWSDL40-3.75 |
40KV |
3.75mA |
150W |
| #6 |
IPS-ATDWSDL40-7.5 |
40KV |
7.5mA |
300W |
| #7 |
IPS-ATDWSDL40-15 |
40KV |
15mA |
600W |
| #8 |
IPS-ATDWSDL40-30 |
40KV |
30mA |
1200W |
| 50KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL50-0.6 |
50KV |
0.6mA |
30W |
| #2 |
IPS-ATDWSDL50-1.2 |
50KV |
1.2mA |
60W |
| #3 |
IPS-ATDWSDL50-2 |
50KV |
2mA |
100W |
| #4 |
IPS-ATDWSDL50-3 |
50KV |
3mA |
150W |
| #5 |
IPS-ATDWSDL50-6 |
50KV |
6mA |
300W |
| #6 |
IPS-ATDWSDL50-12 |
50KV |
12mA |
600W |
| #7 |
IPS-ATDWSDL50-24 |
50KV |
24mA |
1200W |
| 60KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL60-0.17 |
60KV |
0.17mA |
10W |
| #2 |
IPS-ATDWSDL60-0.5 |
60KV |
0.5A |
30W |
| #3 |
IPS-ATDWSDL60-1 |
60KV |
1mA |
60W |
| #4 |
IPS-ATDWSDL60-1.67 |
60KV |
1.67mA |
100W |
| #5 |
IPS-ATDWSDL60-2.5 |
60KV |
2.5mA |
150W |
| #6 |
IPS-ATDWSDL60-5 |
60KV |
5mA |
300W |
| #7 |
IPS-ATDWSDL60-10 |
60KV |
10mA |
600W |
| #8 |
IPS-ATDWSDL60-20 |
60KV |
20mA |
1200W |
| 70KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL70-0.14 |
70KV |
0.14mA |
10W |
| #2 |
IPS-ATDWSDL70-0.43 |
70KV |
0.43mA |
30W |
| #3 |
IPS-ATDWSDL70-0.85 |
70KV |
0.85mA |
60W |
| #4 |
IPS-ATDWSDL70-1.43 |
70KV |
1.4.3mA |
100W |
| #5 |
IPS-ATDWSDL70-2.14 |
70KV |
2.14mA |
150W |
| #6 |
IPS-ATDWSDL70-4.29 |
70KV |
4.29mA |
300W |
| #7 |
IPS-ATDWSDL70-8.57 |
70KV |
8.57mA |
600W |
| #8 |
IPS-ATDWSDL70-17.1 |
70KV |
17.1mA |
1200W |
| 80KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL80-0.13 |
80KV |
0.13mA |
10W |
| #2 |
IPS-ATDWSDL80-0.38 |
80KV |
0.38mA |
30W |
| #3 |
IPS-ATDWSDL80-0.75 |
80KV |
0.75mA |
60W |
| #4 |
IPS-ATDWSDL80-1.25 |
80KV |
1.25mA |
100W |
| #5 |
IPS-ATDWSDL80-1.88 |
80KV |
1.88mA |
150W |
| #6 |
IPS-ATDWSDL80-3.75 |
80KV |
3.75mA |
300W |
| #7 |
IPS-ATDWSDL80-7.5 |
80KV |
7.5mA |
600W |
| #8 |
IPS-ATDWSDL80-15 |
80KV |
15mA |
1200W |
| 100KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL100-0.1 |
100KV |
0.1mA |
10W |
| #2 |
IPS-ATDWSDL100-0.3 |
100KV |
0.3mA |
30W |
| #3 |
IPS-ATDWSDL100-0.6 |
100KV |
0.6mA |
60W |
| #4 |
IPS-ATDWSDL100-1 |
100KV |
1mA |
100W |
| #5 |
IPS-ATDWSDL100-1.5 |
100KV |
1.5mA |
150W |
| #6 |
IPS-ATDWSDL100-3 |
100KV |
3mA |
300W |
| #7 |
IPS-ATDWSDL100-6 |
100KV |
6mA |
600W |
| #8 |
IPS-ATDWSDL100-12 |
100KV |
12mA |
1200W |
| 120KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL120-0.08 |
120KV |
0.05mA |
10W |
| #2 |
IPS-ATDWSDL120-0.25 |
120KV |
0.25mA |
30W |
| #3 |
IPS-ATDWSDL120-0.5 |
120KV |
0.5mA |
60W |
| #4 |
IPS-ATDWSDL120-0.83 |
120KV |
0.83mA |
100W |
| #5 |
IPS-ATDWSDL120-1.25 |
120KV |
1.25mA |
150W |
| #6 |
IPS-ATDWSDL120-2.5 |
120KV |
2.5mA |
300W |
| #7 |
IPS-ATDWSDL120-5 |
120KV |
5mA |
600W |
| #8 |
IPS-ATDWSDL120-10 |
120KV |
10mA |
1200W |
| 130KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL130-0.23 |
130KV |
0.23mA |
30W |
| #2 |
IPS-ATDWSDL130-0.46 |
130KV |
0.46mA |
60W |
| #3 |
IPS-ATDWSDL130-0.77 |
130KV |
0.77mA |
100W |
| #4 |
IPS-ATDWSDL130-1.15 |
130KV |
1.15mA |
150W |
| #5 |
IPS-ATDWSDL130-2.31 |
130KV |
2.31mA |
300W |
| #6 |
IPS-ATDWSDL130-4.6 |
130KV |
4.6mA |
600W |
| #7 |
IPS-ATDWSDL130-9.2 |
130KV |
9.2mA |
1200W |
600W SERIES TECHNICAL PARAMETERS
Please refer to Table 1, Table 2 and Table 3 for detailed technical parameters of the power supply.
Table 1
Model
Parameter |
1000V600MA |
1200V500MA |
1500V400MA |
2000V300MA |
| Rating |
Voltage (null load) |
10~1000V |
10~1200V |
150~1500V |
200~2000V |
| Current |
0~600mA |
0~500mA |
0~400mA |
0~300mA |
| Over voltage protection |
0~1100V |
0~1320V |
0~1650V |
0~2200V |
| Set resolution |
Over voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.1mA |
| Display resolution |
Voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.1mA |
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Ripple (RMS) |
Voltage |
≤0.5‰ |
≤0.5‰ |
≤0.5‰ |
≤1‰ |
| Size |
520MM (LENGTH) *482MM (WIDTH) *88MM (HEIGHT) |
Table 2
Model
Parameter |
3000V200MA |
4000V150MA |
5000V120MA |
6000V100MA |
| Rating |
Voltage (null load) |
300~3000V |
400~4000V |
500~5000V |
600~6000V |
| Current |
0~200mA |
0~150mA |
0~120mA |
0~100mA |
| Over voltage protection |
0~3300V |
0~4400V |
0~5500V |
0~6600V |
| Set resolution |
Over voltage |
1V |
1V |
1V |
1V |
| Voltage |
1V |
1V |
1V |
1V |
| Current |
0.01mA |
0.01mA |
0.01mA |
0.01mA |
| Display resolution |
Voltage |
1V |
1V |
1V |
1V |
| Current |
0.01mA |
0.01mA |
0.01mA |
0.01mA |
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Ripple (RMS) |
Voltage |
≤1‰ |
≤1‰ |
≤1‰ |
≤1‰ |
| Size |
520mm (Length) *482mm (Width) *88mm (Height) |
Table 3
Model
Parameter |
8000V750MA |
10000V60MA |
12000V50MA |
|
| Rating |
Voltage (null load) |
800~8000V |
1000~10KV |
1200~12KV |
|
| Current |
0~75mA |
0~60mA |
0~50mA |
|
| Over voltage protection |
0~8800V |
0~11KV |
0~13.2KV |
|
| Set resolution |
Over voltage |
1V |
1V |
1V |
|
| Voltage |
1V |
1V |
1V |
|
| Current |
0.01mA |
0.01mA |
0.01mA |
|
| Display resolution |
Voltage |
1V |
1V |
1V |
|
| Current |
0.01mA |
0.01mA |
0.01mA |
|
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
|
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
|
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
|
| Ripple (RMS) |
Voltage |
≤1‰ |
≤1‰ |
≤1‰ |
|
| Size |
520mm (Length)*482mm (Width) * 88mm (Height) |
1200W SERIES TECHNICAL PARAMETERS
For detailed technical parameters of the power supply, please refer to Table 4, Table 5, and Table 6 below.
Table 4
MODEL
PARAMETER |
1000V1200MA |
1200V1000MA |
1500V800MA |
2000V600MA |
| Rating |
Voltage (null load) |
10~1000V |
10~1200V |
150~1500V |
200~2000V |
| Current |
0~1200mA |
0~1000mA |
0~800mA |
0~600mA |
| Over voltage protection |
0~1100V |
0~1320V |
0~1650V |
0~2200V |
| Set resolution |
Over voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.1mA |
| Display resolution |
Voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.1mA |
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Ripple (RMS) |
Voltage |
≤0.5‰ |
≤0.5‰ |
≤0.5‰ |
≤1‰ |
| size |
520mm (length)*482mm (width)*88mm (height) |
Table 5
Model
Parameter |
3000V400MA |
4000V300MA |
5000V240MA |
6000V200MA |
| Rating |
Voltage (null load) |
300~3000V |
400~4000V |
500~5000V |
600~6000V |
| Current |
0~400mA |
0~300mA |
0~240mA |
0~200mA |
| Over voltage protection |
0~3300V |
0~4400V |
0~5500V |
0~6600V |
| Set resolution |
Over voltage |
1V |
1V |
1V |
1V |
| Voltage |
1V |
1V |
1V |
1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.01mA |
| Display resolution |
Voltage |
1V |
1V |
1V |
1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.01mA |
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Ripple (RMS) |
Voltage |
≤1‰ |
≤1‰ |
≤1‰ |
≤1‰ |
| size |
520mm (length)*482mm (width) *88mm (height) |
Table 6
Model
Parameter |
8000V150MA |
10000V120MA |
12000V100MA |
|
| Rating |
Voltage (null load) |
800~8000V |
1000~10KV |
1200~12KV |
|
| Current |
0~150mA |
0~120mA |
0~100mA |
|
| Overvoltage protection |
0~8800V |
0~11KV |
0~13.2KV |
|
| Set resolution |
Overvoltage |
1V |
1V |
1V |
|
| Voltage |
1V |
1V |
1V |
|
| Current |
0.01mA |
0.01mA |
0.01mA |
|
| Display resolution |
Voltage |
1V |
1V |
1V |
|
| Current |
0.01mA |
0.01mA |
0.01mA |
|
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
|
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
|
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
|
| Ripple (RMS) |
Voltage |
≤1‰ |
≤1‰ |
≤1‰ |
|
| SIZE |
520MM (LENGTH)*482MM (WIDTH)*88MM (HEIGHT) |
){kind=link}
){kind=link}