12V/24V/48V/60V/72V/110V/150V/250V/300V 3000W AC DC Regulated LED CCTV Switching Power Supply with CE RoHS

• Output Type: Single
• Warranty: 1 Year
• Output Power: 3000W
• Input Voltage: 110-220V
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Model NO.: IPS-PFC3000-300
• Voltage Regulating Mode: /
• Power Supplying System: /
• Energy Transmission: /
• Modulation System: /
• Certification: CE
• Brand: Idealplusing
• Output Voltage: 0-300VDC
• Output Current: 10A
• Max Power: 3000W
• OEM: Support
• ODM: Support
• Customization: Support
• Transport Package: Carton
• Specification: 300VDC 10A 3000W
• Trademark: IDEALPLUSING
• Origin: China
• Production Capacity: 10000PCS/ Month

Product Description

IPS-PFC3000W series 24V 36V 48V 60V 72V 110V PFC Switching Power Supply-IDEALPLUSING
 

Product Description

 

I. INPUT PARAMETER

Input voltage	110VAC-240VAC (wide voltage adaptive)
Frequency Range	47-63Hz
Input Current(Maximum value)	Full load 3000W output, use 220VAC input 16A Full load 2500W output, use 110VAC input 26A (When using 110V input, the maximum power is limited to 2500W)
Power during standby	10W
Power factor (PF value)	Use the 220VAC input and power 100% full load,Power factor ≥ 0.96 (refer to PF value in the figure below) Use the 110VAC input and power 100% full load,Power factor ≥ 0.97 (refer to PF value in the figure below)
Input Wiring method	3PIN KF78 spacing 14mm PCB fence type wiring terminal with protective cover
Enter a surge current	Cold start 220VAC/53A, 110VAC/28A

II. OUTPUT PARAMETER

Model (IPS-PFC)		3000-24	3000-36	3000-48	3000-60	3000-72	3000-110
DC output voltage		24VDC	36VDC	48VDC	60VDC	72VDC	110VDC
220VAC Input	Output current	125A	83.3A	62.5A	50A	41.6A	27.2A
	Output Power	3000W	3000W	3000W	3000W	3000W	3000W
	Efficiency	89%	91.2%	91.8%	92%	92.3%	93.2%
110VAC Input	Output current	104A	69.4A	52A	41.6A	34.7A	22.7A
	Output Power	2500W	2500W	2500W	2500W	2500W	2500W
	Efficiency	87.2%	89.3%	89.6%	90.3%	91.4%	91.5%
	Tip: When using the AC110V input, Need to reduce the output power to 2500W
Ripple (max)		160mv	200mv	220mv	260mv	280mv	330mv
Voltage regulation range		17-24V	26-36V	33-48V	42-60V	48-72V	74-110V
Linear adjustment rate		±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load Regulation		±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Voltage accuracy		±2%	±2%	±2%	±2%	±2%	±2%
Start / rise time		Power-on post-delay 3-4 second start/ 500MS voltage complete
Power-off keeping time		16ms(220VAC  80% load )    8ms(220VAC  100% load )
Output wiring method		Copper strip terminal, M5 nut seat,Need to use a power supporting copper terminal wiring
Efficiency This parameter is measured under 100% full load conditions, the efficiency is not a constant value (refer to the following efficiency VS load graph)
Wave and noise measurement Method: Use 12 "twisted pair, output terminal parallel 0.1uf and 47uf capacitors,  the oscilloscope bandwidth is limited to 20 MHz.

III. FUNCTION

Function	PS-ON Terminal short circuit: power off output voltage PS-ON Terminal open: turn on the output voltage(Default is open) Note: The PS-ON function controls the output voltage on the power supply to turn off. When the output voltage is turned off, the power is in low power standby state (standby power 10 watts), only only the auxiliary power supply circuit is working, the heat dissipation fan is working properly. It is not disconnected from the 220V input.
Output voltage regulation	Output voltage adjustable, Adj-V potentiometer manually adjustment )
Output current adjustment	The output current can be adjusted, the ADJ-A potentiometer manually adjusts, when the load reaches the current setting value, the constant current output (output current remains unchanged, the output voltage is reduced with the load)
Auxiliary voltage output	This machine provides a 12V-300mA auxiliary voltage output

IV. TOPOLOGY

PFC	Interlaced Boost
PWM	Staggered parallel Two-transistor forword

V. PROTECTIVE FUNCTION

Output overvoltage protection	120% of the maximum output voltage cut off, does not automatically recover, to re-power it will recover
Output short circuit protection	There is no output after the output is shorted, and the output voltage is automatically restored after short circuit release.
Output overload protection	The overload protection mode is constant current limit mode, the lock output current value is unchanged, and the output voltage is increased and decreases with the load.
Overheating protection	When the heat sink temperature of the PWM transistor reaches 85 ° C ± 5%, the output voltage is turned off. Automatic recovery when the temperature drops to 75 ° C ± 5%

VI. SAFETY AND EMC STANDARD

EMC standard	Does not conform to EMC standards
Insulation resistance	I/P-O/P,I/P-FG,0/P-FG:100M Ohms /500VDC /25ºC/70%RH
Leakage current	≤2MA/AC220V
Withstand voltage	Input and output :3000VAC     Input and ground :1500VAC       Output end and housing:500VAC

VII. ENVIRONMENT

Operating temperature	-30-40 ° C can be used in 100% full power, more than this temperature range to reduce the output power (Refer to the temperature drop curve below)
Storage temperature, humidity	-40~+55ºC,20-90%RH
Altitude	Only used in 2500m altitude

 

Detailed Photos