| Output Type: | Single |
|---|---|
| Warranty: | 1 Year |
| Output Power: | 950W |
| Input Voltage: | 220V |
| Connection Mode: | Wire Connection |
| Starting Mode: | Switch |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| 1 | Small size and light weight are suitable for work surface use and rack installation. |
| 2 | Using PWM modulation, the consumes power of crystal module is low, high efficiency, and more power.Well-designed electronic technology circuit, forced air cooling and heat treatment, with a very low temperature coefficient. |
| 3 | Low noise and low ripple. |
| 4 | Using high gain amplifier circuit design, with good fast response characteristics. |
| 5 | Using a 4-bit high sampling rate, high-resolution voltage, current digital display meter. |
| 6 | Built-in O.V.P over-voltage protection circuit and O.T.P over-temperature protection circuit, the protection function is perfect and reliable. |
| 7 | This product is designed with load terminal voltage detection terminal, which has the function of accurately reading the voltage of the load terminal and performing precise control. |
| Brand | IDEALPLUSING |
| Model | IPS-ATDYN1905 |
| AC Input | Single phase 220VAC±10% optinal |
| Input Voltage Range | 220VAC±10% optinal |
| Input frequency | 50Hz/60Hz |
| Output voltage | 0~190VDC |
| Output current | 5A |
| Output Power | 950W |
| Voltage Stabilization | ≤0.3%+10mV |
| Load Stabilization | ≤0.5%+30mV |
| Ripples and Noises | ≤0.5%+10mVrms |
| Voltage Display Accuracy | 3-digit Accuracy: ±1%+1 word |
| Display Format | 0.000V-9.999V; 0.00V-99.99V; 0.0V-999.9V |
| Current Display Accuracy | NO current display |
| Output Over Voltage Protection | Built-in O.V.P. protection, protection limited value is rated +5% |
| Output Over Load Protection | Overload, current limit, constant current output |
| Over Temperature Protection | Built-in O.T.P. protection, Protection value 85ºC±5% heat sink temperature |
| Voltage Setting | 10-turn precision potentiometer |
| Current Setting | NO current display potentiometer |
| Output Polarity | Output Positive(+) negative(- ) Can be grounded at will |
| Heat Dissipation Way | Forced fan cooling |
| Work Conditions | Indoor use design,Temperature:0ºC~40ºC; Humidity: 10%~85%RH |
| Storage Conditions | Temperature:-20ºC~70ºC;Humidity: 10%~90%RH |
| Power Supply Dimension | 295*150*108MM |
| Packaging Carton Dimension | 350*180*150(MM) |
| Net Weight | 5KG |
| Gross Weight | 6KG |
| OPTINAL Function | |
| #1 | Desk/ tower type /19inch Rack Mount Type |
| #2 | 0-5VDC /0-10VDC analog signal control output voltage & current |
| #3 | 0-5VDC /0-10VDC analog signal to read-back output voltage & current |
| #4 | 0-5VDC /0-10VDC analog Switch signal to control output ON/OFF |
| #5 | 4-20mA analog signal control output voltage & current |
| #6 | RS232/RS485 Communication port control by computer |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}