| Output Type: | Single |
|---|---|
| Warranty: | 1 Year |
| Output Power: | 3000W |
| Input Voltage: | 110-220V |
| Connection Mode: | Series Switching Power Supply |
| Starting Mode: | / |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Original meanwell CSP-3000-400 120V 250V 400V 25A 12A 7.5A 3000W high power dc power supply
FEATURES
| 1 | Support 0-5vdc / 0-12vdc analog signal external control switching mode 200w 0-200v 0-220v Variable dc power supply |
| 2 | Adjustable with Compact size, light weight |
| 3 | Wide range AC Input , AC input 110V/220Vac input selected by switch |
| 4 | 100% full load burn-in test |
| 5 | Protection: Short circuit / Over load / Over voltage |
| 6 | Fixed switching frequency at 25KHz |
| 7 | 1 year warranty |
| 8 | High efficiency, reliability quality, competitive cost |
| 9 | 0-5Vdc / 0-10Vdc External control output (Optional) |
| 10 | Extra adjustable potentiometer (Optional) |
| 11 | Output voltage adjustable, output current be fix |
| MODEL | IPS-3000-120 | IPS-3000-250 | IPS-3000-400 | |
| Output | DC voltage | 120V | 250V | 400V |
| RATED current | 25A | 12A | 7.5A | |
| Current Rated | 0-25A | 0-12A | 0-7.5A | |
| Rated power | 3000W | 3000W | 3000W | |
| Ripple&Nosie(max)Note.2 | 800mVp-p | 1000mVp-p | 1200mVp-p | |
| Constant Current Region | 90-120V | 125-250V | 200-400V | |
| VOLTAGE TOLERANCE Note. 3 | ±1.0% | ±1.0% | ±1.0% | |
| LINE REGULATION Note.4 | ±0.5% | ±0.5% | ±0.5% | |
| LOAD REGULATION Note .5 | ±0.5% | ±0.5% | ±0.5% | |
| SETUP RISE TIME | 1000ms . 80ms / 230VAC at full load | |||
| HOLD UP TIME ( Typ . | 10ms at full load | |||
| INPUT | Voltage range Note.4 | 80-264VAC 254-370VDC | ||
| Frequency range | 47~63Hz | |||
| POWER FACTOR(TyP.) | PF≥0.95/230VAC at full load | |||
| Efficiency (typical) | 92% | 92.5% | 93% | |
| Ac current(Typ.) | 20A/180VAC 16A/230VAC | |||
| INRUSH CURRENT(TyP.) | Cold start 60A/230VAC | |||
| LEAKAGE CURRENT(TyP.) | < 0.3mA / 240VAC | |||
| PROTECTION | OVERLOAD | 105-120% rated output power | ||
| Protection type Hiccup mode, recovers automatically after fault condition is removed | ||||
| OVER VOLTAGE | Protection type: Shut down olp voltage, re-power on to recover | |||
| 120-150V | 265-315V | 420-500V | ||
| OVER-TEMPERATURE | Hiccup mode recovers automatically after the fault condition is removed | |||
| FUNCTION | ALAPM SIGNAL OUTPUT | The power supply is normal. Refer to the function manual | ||
| ENVIRONMENT | WORKING TEMP | -20-+65ºC( Refer to "Derating Curve") | ||
| WORKING HUMIDITY | 20-90% RH non-condensing | |||
| STORAGE TEMP. HUMIDITY | 40~+85ºC,10~95%RH non-condensing | |||
| TEMP. COEFFICIENT | ±0.05%/ºC(0-50ºC) | |||
| VIBRATION | 10-500HZ, 2G 10min /cycle, 60min. each along X, Y, Z axes | |||
| SAFETY | SAFETY STANDARDS | UL60950-1 approved | ||
| WITHSTAND VOLTAGE | 1/P-O/P. 3KVAC I/P-FG: 2KVAC O/P-FG: 0.5KVAC | |||
| ISOLATION RESISTANCE | V/P-O/P LP-FG O/- FG: 100M Chms/500VDC /25C/70%RH | |||
| OTHERS | MTBF | 223.8K hrs min . Telcordia SR-332(Bellcore);75.1 K hrs min | ||
| DIMENSION | 278*177.8*63.5MM(L*W*H) | |||
| PACKING | 4KG | |||
| NOTE | 1 . All parameters NOT specally menod are measured a 230VAC nu ed ad and 25 of ament temperature2 Rple & nose are measure a 0MHZ of bawh g a 1w w m wh a 4 l acor3 . Tolerance incudes set up tolerance , line regulation and load regulation .Line regulation is measured from low line to high line at rated load5 . Load regulation is measured fromm % to 1000% rated load6 . Length of set u time is measured at old st a T N OFF he power supply very quicky may lead to increase of the set up7 . The 150 % peak oad capab s i i for o s for 12-48 5 w n r h p mode if the peak load s deliveredfor over 1 second and will recover once ites to the rated current level ( 1 15VAC / 230VAC )8 . The ambient meare dea of 5 / 1000 is ded or oea aude greater han 2000m ( 6500ft | |||
Custom table
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}