Voltage display, voltage and current adjustable ac-dc 7.2v to 125a 900w switching power supply
I. FEATURES
| 1 |
Small size and light weight are suitable for work surface use and rack installation. |
| 2 |
Using PWM modulation, the consumption power of the crystal module is low, high efficiency, and more power. Well-designed electronic technology circuit, forced air cooling and heat treatment, with a very low-temperature coefficient. |
| 3 |
Low noise and low ripple. |
| 4 |
Using high gain amplifier circuit design, with good fast response characteristics. |
| 5 |
Using a 4-bit high sampling rate, high-resolution voltage, current digital display meter. |
| 6 |
Built-in O.V.P over-voltage protection circuit and O.T.P over-temperature protection circuit, the protection function is perfect and reliable. |
| 7 |
This product is designed with a load terminal voltage detection terminal, which has the function of accurately reading the voltage of the load terminal and performing precise control. |
II.TECHNICAL PARAMETRIC
| Brand |
IDEALPLUSING |
| Model |
IPS-ATDYN7.2125 |
| AC Input |
Single phase 220VAC±10% optional |
| Input Voltage Range |
220VAC±10% optional |
| Input frequency |
50Hz/60Hz |
| Output voltage |
0~7.2VDC |
| Output current |
125A |
| Output Power |
950W |
| Voltage Stabilization |
≤0.3%+10mV |
| Load Stabilization |
≤0.5%+30mV |
| Ripples and Noises |
≤0.5%+10mVrms |
| Voltage Display Accuracy |
3-digit Accuracy: ±1%+1 word |
| Display Format |
0.000V-9.999V; 0.00V-99.99V; 0.0V-999.9V |
| Current Display Accuracy |
NO current display |
| Output Over Voltage Protection |
Built-in O.V.P. protection, protection limited value is rated +5% |
| Output Over Load Protection |
Overload, current limit, constant current output |
| Over Temperature Protection |
Built-in O.T.P. protection, Protection value 85ºC±5% heat sink temperature |
| Voltage Setting |
10-turn precision potentiometer |
| Current Setting |
NO current display potentiometer |
| Output Polarity |
Output Positive(+) negative(- ) Can be grounded at will |
| Heat Dissipation Way |
Forced fan cooling |
| Work Conditions |
Indoor use design, Temperature:0ºC~40ºC; Humidity: 10%~85%RH |
| Storage Conditions |
Temperature:-20ºC~70ºC;Humidity: 10%~90%RH |
| Power Supply Dimension |
265*145*65MM |
| Packaging Carton Dimension |
350*180*150(MM) |
| Net Weight |
4.5KG |
| Gross Weight |
7KG |
| OPTINAL Function |
| #1 |
Desk/ tower type /19inch Rack Mount Type |
| #2 |
0-5VDC /0-10VDC analog signal control output voltage & current |
| #3 |
0-5VDC /0-10VDC analog signal to read-back output voltage & current |
| #4 |
0-5VDC /0-10VDC analog Switch signal to control output ON/OFF |
| #5 |
4-20mA analog signal control output voltage & current |
| #6 |
RS232/RS485 Communication port control by computer |
Product display
){kind=link}