High cost-effective electrospinning electrospinning & diy electrospinning unit
I. INTRODUCTION
| 1 |
A high voltage power supply is a high precision, high stability high voltage power supply with positive or negative polarity output in a range of sizes, with output voltages from 0 to 130KV and maximum output power of 10000W. |
| 2 |
The output voltage and current values are displayed on a digital meter on the panel for easy operation. The output voltage can be continuously and linearly adjusted by the user via the potentiometer knob. |
| 3 |
The power supply is protected against over-voltage, over-current, arc pull, and short circuits. |
| 4 |
The power supply has a metal casing with a good electrical shielding effect. |
II. APPLICATION
| 1 |
Electrostatic Separation |
12 |
Electrostatic Spraying |
| 2 |
Capillary Electrophoresis |
13 |
Electrostatic Flocking |
| 3 |
Electrostatic Dust Removal |
14 |
Old Refining Equipment |
| 4 |
Pressure Resistance Testing |
15 |
Electrostatic Spinning |
| 5 |
High-Pressure Bias |
16 |
High-Pressure Deburring |
| 6 |
High-Pressure Ignition |
17 |
Material Sorting |
| 7 |
Metal Vaporization |
18 |
Electric Explosion |
| 8 |
Air Purification |
19 |
Water Purification |
| 9 |
Electron Beam |
20 |
Medical Sterilization |
| 10 |
Communication And Transportation |
21 |
Scientific Research |
| 11 |
National Defense |
22 |
|
| ..... |
III. FEATURES
| 1 |
High stability, high accuracy, and small size. |
| 2 |
Continuous linear adjustment of the output voltage. |
| 3 |
Adjustment of the local control potentiometer. |
| 4 |
Protection functions for over-voltage, over-current, arc pulling, and short-circuit. |
| 5 |
Start and stop function |
| 6 |
Low EMI, high anti-interference capability |
PRODUCT LIST
| Power supply models |
/ |
| Output voltage range |
0~+130KVDC &0~-130KVDC |
| Rated output current |
1mA |
| Ripple noise |
≤1% |
| Voltage regulation rate |
≤0.1% |
| Load Adjustment Rate |
≤0.5% |
SPECIFICATION
| Technical specification |
Specification indicator |
| Input voltage |
AC90V~AC264V,47Hz~63Hz |
| Output voltage |
See "List of typical high voltage power supplies" for details, customised to suit customer requirements |
| Output current |
| Output power |
≤300W |
| Ripple voltage |
≤0.5% |
| Voltage regulation rate |
Less than 0.1% within the maximum permissible range of input voltage for a given load |
| Load Adjustment Rate |
Input voltage constant, load from no-load to rated, less than 0.5% |
| Time-drifting |
≤0.1%/h (after 30 minutes of power operation) |
| Warm float |
≤0.1%/ºC |
| This control |
The output voltage can be set between 0V and the maximum voltage by adjusting the multi-turn potentiometer. |
| Start/stop function |
Controls the start and stop of the power supply; when the switch is "pressed", the power supply is activated |
| Grounding method |
AC isolated, reference ground to earth |
| Protection method |
Flow limiting type |
| Operating temperature range |
0ºC~+50ºC |
| Storage temperature range |
-25ºC~+75ºC |
| Net Weight |
3.0KG |
| Housing material |
Aluminium |
| Dimension |
L300*W260*H45(MM) |
FORM FACTOR AND DIMENSIONS
MAIN FUNCTION DESCRIPTION
WIRING DIAGRAM
PRODUCT OVERVIEW
INSTALLATION & NOTES
This product is a high voltage power supply. Please be sure to operate it correctly and take safety precautions, otherwise, electric shock accidents and property damage may occur. Please read the following precautions carefully.
| 1 |
Place the power supply on a horizontal surface for use. |
| 2 |
Ensure that the power supply is reliably earthed before use. |
| 3 |
Please keep the output of the power supply at a certain insulating distance from the surrounding components to avoid discharge. |
| 4 |
To ensure reliable operation of the product without overheating and high temperatures, blocking and covering the ventilation holes and keeping away from heat sources are strictly prohibited. |
| 5 |
The use of the power supply should be avoided in dusty or humid environments, otherwise, the insulation will be reduced and partial discharge will occur. |
| 5 |
It is strictly forbidden to disassemble and repair the high-voltage power supply to avoid personal injury and economic loss caused by high-voltage power supply failure. |
| 6 |
It is strictly forbidden to operate or repair the internal circuit of the high-voltage power supply with electricity, as dangerous or even fatal voltages can be generated inside the power supply. |
| 7 |
Do not touch the high voltage connectors unless the load and the capacitors inside the power supply have been completely discharged after switching off the high voltage power supply. |
| 8 |
It is strictly forbidden to insert other objects into the ventilation holes of the equipment to avoid accidental contact with the circuit, short-circuiting, causing fire or electric shock. |
IV. MODEL SELECTION
| 1KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL1-10 |
1KV |
10mA |
10W |
| #2 |
IPS-ATDWSDL1-30 |
1KV |
30mA |
30W |
| #3 |
IPS-ATDWSDL1-60 |
1KV |
60mA |
60W |
| #4 |
IPS-ATDWSDL1-100 |
1KV |
100mA |
100W |
| #5 |
IPS-ATDWSDL1-150 |
1KV |
150mA |
150W |
| #6 |
IPS-ATDWSDL1-300 |
1KV |
300mA |
300W |
| #7 |
IPS-ATDWSDL1-600 |
1KV |
600mA |
600W |
| #8 |
IPS-ATDWSDL1-1200 |
1KV |
1200mA |
1200W |
| 2KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL2-5 |
2KV |
5mA |
10W |
| #2 |
IPS-ATDWSDL2-15 |
2KV |
15mA |
30W |
| #3 |
IPS-ATDWSDL2-30 |
2KV |
30mA |
60W |
| #4 |
IPS-ATDWSDL2-50 |
2KV |
50mA |
100W |
| #5 |
IPS-ATDWSDL2-75 |
2KV |
75mA |
150W |
| #6 |
IPS-ATDWSDL2-150 |
2KV |
150mA |
300W |
| #7 |
IPS-ATDWSDL2-300 |
2KV |
300mA |
600W |
| #8 |
IPS-ATDWSDL2-600 |
2KV |
600mA |
1200W |
| 3KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL3-3.33 |
3KV |
3.33mA |
10W |
| #2 |
IPS-ATDWSDL3-10 |
3KV |
10mA |
30W |
| #3 |
IPS-ATDWSDL3-20 |
3KV |
20mA |
60W |
| #4 |
IPS-ATDWSDL3-33.3 |
3KV |
33.3mA |
100W |
| #5 |
IPS-ATDWSDL3-50 |
3KV |
50mA |
150W |
| #6 |
IPS-ATDWSDL3-100 |
3KV |
100mA |
300W |
| #7 |
IPS-ATDWSDL3-200 |
3KV |
200mA |
600W |
| #8 |
IPS-ATDWSDL3-400 |
3KV |
400mA |
1200W |
| 6KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL6-1.67 |
6KV |
1.67mA |
10W |
| #2 |
IPS-ATDWSDL6-5 |
6KV |
5mA |
30W |
| #3 |
IPS-ATDWSDL6-10 |
6KV |
10mA |
60W |
| #4 |
IPS-ATDWSDL6-16.7 |
6KV |
16.7mA |
100W |
| #5 |
IPS-ATDWSDL6-25 |
6KV |
25mA |
150W |
| #6 |
IPS-ATDWSDL6-50 |
6KV |
50mA |
300W |
| #7 |
IPS-ATDWSDL6-100 |
6KV |
100mA |
600W |
| #8 |
IPS-ATDWSDL6-200 |
6KV |
200mA |
1200W |
| 8KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL8-1.25 |
8KV |
1.25mA |
10W |
| #2 |
IPS-ATDWSDL8-3.75 |
8KV |
3.75mA |
30W |
| #3 |
IPS-ATDWSDL8-7.5 |
8KV |
7.5mA |
60W |
| #4 |
IPS-ATDWSDL8-12.5 |
8KV |
12.5mA |
100W |
| #5 |
IPS-ATDWSDL8-18.8 |
8KV |
18.8mA |
150W |
| #6 |
IPS-ATDWSDL8-37.5 |
8KV |
37.5mA |
300W |
| #7 |
IPS-ATDWSDL8-75 |
8KV |
75mA |
600W |
| #8 |
IPS-ATDWSDL8-150 |
8KV |
150mA |
1200W |
| 10KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL10-1 |
10KV |
1mA |
10W |
| #2 |
IPS-ATDWSDL10-3 |
10KV |
3mA |
30W |
| #3 |
IPS-ATDWSDL10-6 |
10KV |
6mA |
60W |
| #4 |
IPS-ATDWSDL10-10 |
10KV |
10mA |
100W |
| #5 |
IPS-ATDWSDL10-15 |
10KV |
15mA |
150W |
| #6 |
IPS-ATDWSDL10-30 |
10KV |
30mA |
300W |
| #7 |
IPS-ATDWSDL10-60 |
10KV |
60mA |
600W |
| #8 |
IPS-ATDWSDL10-120 |
10KV |
120mA |
1200W |
| 15KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL15-0.67 |
15KV |
0.67mA |
10W |
| #2 |
IPS-ATDWSDL15-2 |
15KV |
2mA |
30W |
| #3 |
IPS-ATDWSDL15-4 |
15KV |
4mA |
60W |
| #4 |
IPS-ATDWSDL15-6.67 |
15KV |
6.67mA |
100W |
| #5 |
IPS-ATDWSDL15-10 |
15KV |
10mA |
150W |
| #6 |
IPS-ATDWSDL15-20 |
15KV |
20mA |
300W |
| #7 |
IPS-ATDWSDL15-40 |
15KV |
40mA |
600W |
| #8 |
IPS-ATDWSDL15-80 |
15KV |
80mA |
1200W |
| 20KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL20-0.5 |
20KV |
0.5mA |
10W |
| #2 |
IPS-ATDWSDL20-1.5 |
20KV |
1.5mA |
30W |
| #3 |
IPS-ATDWSDL20-3 |
20KV |
3mA |
60W |
| #4 |
IPS-ATDWSDL20-5 |
20KV |
5mA |
100W |
| #5 |
IPS-ATDWSDL20-7.5 |
20KV |
7.5mA |
150W |
| #6 |
IPS-ATDWSDL20-15 |
20KV |
15mA |
300W |
| #7 |
IPS-ATDWSDL20-30 |
20KV |
30mA |
600W |
| #8 |
IPS-ATDWSDL20-60 |
20KV |
60mA |
1200W |
| 30KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL30-0.33 |
30KV |
0.33mA |
10W |
| #2 |
IPS-ATDWSDL30-1 |
30KV |
1mA |
30W |
| #3 |
IPS-ATDWSDL30-2 |
30KV |
2mA |
60W |
| #4 |
IPS-ATDWSDL30-3.33 |
30KV |
3.33mA |
100W |
| #5 |
IPS-ATDWSDL30-5 |
30KV |
5mA |
150W |
| #6 |
IPS-ATDWSDL30-10 |
30KV |
10mA |
300W |
| #7 |
IPS-ATDWSDL30-20 |
30KV |
20mA |
600W |
| #8 |
IPS-ATDWSDL30-40 |
30KV |
40mA |
1200W |
| 40KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL40-0.25 |
40KV |
0.25mA |
10W |
| #2 |
IPS-ATDWSDL40-0.75 |
40KV |
0.75mA |
30W |
| #3 |
IPS-ATDWSDL40-1.5 |
40KV |
1.5mA |
60W |
| #4 |
IPS-ATDWSDL40-2.5 |
40KV |
2.5mA |
100W |
| #5 |
IPS-ATDWSDL40-3.75 |
40KV |
3.75mA |
150W |
| #6 |
IPS-ATDWSDL40-7.5 |
40KV |
7.5mA |
300W |
| #7 |
IPS-ATDWSDL40-15 |
40KV |
15mA |
600W |
| #8 |
IPS-ATDWSDL40-30 |
40KV |
30mA |
1200W |
| 50KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL50-0.6 |
50KV |
0.6mA |
30W |
| #2 |
IPS-ATDWSDL50-1.2 |
50KV |
1.2mA |
60W |
| #3 |
IPS-ATDWSDL50-2 |
50KV |
2mA |
100W |
| #4 |
IPS-ATDWSDL50-3 |
50KV |
3mA |
150W |
| #5 |
IPS-ATDWSDL50-6 |
50KV |
6mA |
300W |
| #6 |
IPS-ATDWSDL50-12 |
50KV |
12mA |
600W |
| #7 |
IPS-ATDWSDL50-24 |
50KV |
24mA |
1200W |
| 60KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL60-0.17 |
60KV |
0.17mA |
10W |
| #2 |
IPS-ATDWSDL60-0.5 |
60KV |
0.5A |
30W |
| #3 |
IPS-ATDWSDL60-1 |
60KV |
1mA |
60W |
| #4 |
IPS-ATDWSDL60-1.67 |
60KV |
1.67mA |
100W |
| #5 |
IPS-ATDWSDL60-2.5 |
60KV |
2.5mA |
150W |
| #6 |
IPS-ATDWSDL60-5 |
60KV |
5mA |
300W |
| #7 |
IPS-ATDWSDL60-10 |
60KV |
10mA |
600W |
| #8 |
IPS-ATDWSDL60-20 |
60KV |
20mA |
1200W |
| 70KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL70-0.14 |
70KV |
0.14mA |
10W |
| #2 |
IPS-ATDWSDL70-0.43 |
70KV |
0.43mA |
30W |
| #3 |
IPS-ATDWSDL70-0.85 |
70KV |
0.85mA |
60W |
| #4 |
IPS-ATDWSDL70-1.43 |
70KV |
1.4.3mA |
100W |
| #5 |
IPS-ATDWSDL70-2.14 |
70KV |
2.14mA |
150W |
| #6 |
IPS-ATDWSDL70-4.29 |
70KV |
4.29mA |
300W |
| #7 |
IPS-ATDWSDL70-8.57 |
70KV |
8.57mA |
600W |
| #8 |
IPS-ATDWSDL70-17.1 |
70KV |
17.1mA |
1200W |
| 80KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL80-0.13 |
80KV |
0.13mA |
10W |
| #2 |
IPS-ATDWSDL80-0.38 |
80KV |
0.38mA |
30W |
| #3 |
IPS-ATDWSDL80-0.75 |
80KV |
0.75mA |
60W |
| #4 |
IPS-ATDWSDL80-1.25 |
80KV |
1.25mA |
100W |
| #5 |
IPS-ATDWSDL80-1.88 |
80KV |
1.88mA |
150W |
| #6 |
IPS-ATDWSDL80-3.75 |
80KV |
3.75mA |
300W |
| #7 |
IPS-ATDWSDL80-7.5 |
80KV |
7.5mA |
600W |
| #8 |
IPS-ATDWSDL80-15 |
80KV |
15mA |
1200W |
| 100KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL100-0.1 |
100KV |
0.1mA |
10W |
| #2 |
IPS-ATDWSDL100-0.3 |
100KV |
0.3mA |
30W |
| #3 |
IPS-ATDWSDL100-0.6 |
100KV |
0.6mA |
60W |
| #4 |
IPS-ATDWSDL100-1 |
100KV |
1mA |
100W |
| #5 |
IPS-ATDWSDL100-1.5 |
100KV |
1.5mA |
150W |
| #6 |
IPS-ATDWSDL100-3 |
100KV |
3mA |
300W |
| #7 |
IPS-ATDWSDL100-6 |
100KV |
6mA |
600W |
| #8 |
IPS-ATDWSDL100-12 |
100KV |
12mA |
1200W |
| 120KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL120-0.08 |
120KV |
0.05mA |
10W |
| #2 |
IPS-ATDWSDL120-0.25 |
120KV |
0.25mA |
30W |
| #3 |
IPS-ATDWSDL120-0.5 |
120KV |
0.5mA |
60W |
| #4 |
IPS-ATDWSDL120-0.83 |
120KV |
0.83mA |
100W |
| #5 |
IPS-ATDWSDL120-1.25 |
120KV |
1.25mA |
150W |
| #6 |
IPS-ATDWSDL120-2.5 |
120KV |
2.5mA |
300W |
| #7 |
IPS-ATDWSDL120-5 |
120KV |
5mA |
600W |
| #8 |
IPS-ATDWSDL120-10 |
120KV |
10mA |
1200W |
| 130KV |
| NO |
Model |
Output voltage(KV) |
Output Current(mA) |
Output Capacity(W) |
| #1 |
IPS-ATDWSDL130-0.23 |
130KV |
0.23mA |
30W |
| #2 |
IPS-ATDWSDL130-0.46 |
130KV |
0.46mA |
60W |
| #3 |
IPS-ATDWSDL130-0.77 |
130KV |
0.77mA |
100W |
| #4 |
IPS-ATDWSDL130-1.15 |
130KV |
1.15mA |
150W |
| #5 |
IPS-ATDWSDL130-2.31 |
130KV |
2.31mA |
300W |
| #6 |
IPS-ATDWSDL130-4.6 |
130KV |
4.6mA |
600W |
| #7 |
IPS-ATDWSDL130-9.2 |
130KV |
9.2mA |
1200W |
600W SERIES TECHNICAL PARAMETERS
Please refer to Table 1, Table 2 and Table 3 for detailed technical parameters of the power supply.
Table 1
Model
Parameter |
1000V600MA |
1200V500MA |
1500V400MA |
2000V300MA |
| Rating |
Voltage (null load) |
10~1000V |
10~1200V |
150~1500V |
200~2000V |
| Current |
0~600mA |
0~500mA |
0~400mA |
0~300mA |
| Over voltage protection |
0~1100V |
0~1320V |
0~1650V |
0~2200V |
| Set resolution |
Over voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.1mA |
| Display resolution |
Voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.1mA |
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Ripple (RMS) |
Voltage |
≤0.5‰ |
≤0.5‰ |
≤0.5‰ |
≤1‰ |
| Size |
520MM (LENGTH) *482MM (WIDTH) *88MM (HEIGHT) |
Table 2
Model
Parameter |
3000V200MA |
4000V150MA |
5000V120MA |
6000V100MA |
| Rating |
Voltage (null load) |
300~3000V |
400~4000V |
500~5000V |
600~6000V |
| Current |
0~200mA |
0~150mA |
0~120mA |
0~100mA |
| Over voltage protection |
0~3300V |
0~4400V |
0~5500V |
0~6600V |
| Set resolution |
Over voltage |
1V |
1V |
1V |
1V |
| Voltage |
1V |
1V |
1V |
1V |
| Current |
0.01mA |
0.01mA |
0.01mA |
0.01mA |
| Display resolution |
Voltage |
1V |
1V |
1V |
1V |
| Current |
0.01mA |
0.01mA |
0.01mA |
0.01mA |
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Ripple (RMS) |
Voltage |
≤1‰ |
≤1‰ |
≤1‰ |
≤1‰ |
| Size |
520mm (Length) *482mm (Width) *88mm (Height) |
Table 3
Model
Parameter |
8000V750MA |
10000V60MA |
12000V50MA |
|
| Rating |
Voltage (null load) |
800~8000V |
1000~10KV |
1200~12KV |
|
| Current |
0~75mA |
0~60mA |
0~50mA |
|
| Over voltage protection |
0~8800V |
0~11KV |
0~13.2KV |
|
| Set resolution |
Over voltage |
1V |
1V |
1V |
|
| Voltage |
1V |
1V |
1V |
|
| Current |
0.01mA |
0.01mA |
0.01mA |
|
| Display resolution |
Voltage |
1V |
1V |
1V |
|
| Current |
0.01mA |
0.01mA |
0.01mA |
|
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
|
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
|
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
|
| Ripple (RMS) |
Voltage |
≤1‰ |
≤1‰ |
≤1‰ |
|
| Size |
520mm (Length)*482mm (Width) * 88mm (Height) |
1200W SERIES TECHNICAL PARAMETERS
For detailed technical parameters of the power supply, please refer to Table 4, Table 5, and Table 6 below.
Table 4
MODEL
PARAMETER |
1000V1200MA |
1200V1000MA |
1500V800MA |
2000V600MA |
| Rating |
Voltage (null load) |
10~1000V |
10~1200V |
150~1500V |
200~2000V |
| Current |
0~1200mA |
0~1000mA |
0~800mA |
0~600mA |
| Over voltage protection |
0~1100V |
0~1320V |
0~1650V |
0~2200V |
| Set resolution |
Over voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.1mA |
| Display resolution |
Voltage |
0.1V |
0.1V |
0.1V |
0.1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.1mA |
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Ripple (RMS) |
Voltage |
≤0.5‰ |
≤0.5‰ |
≤0.5‰ |
≤1‰ |
| size |
520mm (length)*482mm (width)*88mm (height) |
Table 5
Model
Parameter |
3000V400MA |
4000V300MA |
5000V240MA |
6000V200MA |
| Rating |
Voltage (null load) |
300~3000V |
400~4000V |
500~5000V |
600~6000V |
| Current |
0~400mA |
0~300mA |
0~240mA |
0~200mA |
| Over voltage protection |
0~3300V |
0~4400V |
0~5500V |
0~6600V |
| Set resolution |
Over voltage |
1V |
1V |
1V |
1V |
| Voltage |
1V |
1V |
1V |
1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.01mA |
| Display resolution |
Voltage |
1V |
1V |
1V |
1V |
| Current |
0.1mA |
0.1mA |
0.1mA |
0.01mA |
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
| Ripple (RMS) |
Voltage |
≤1‰ |
≤1‰ |
≤1‰ |
≤1‰ |
| size |
520mm (length)*482mm (width) *88mm (height) |
Table 6
Model
Parameter |
8000V150MA |
10000V120MA |
12000V100MA |
|
| Rating |
Voltage (null load) |
800~8000V |
1000~10KV |
1200~12KV |
|
| Current |
0~150mA |
0~120mA |
0~100mA |
|
| Overvoltage protection |
0~8800V |
0~11KV |
0~13.2KV |
|
| Set resolution |
Overvoltage |
1V |
1V |
1V |
|
| Voltage |
1V |
1V |
1V |
|
| Current |
0.01mA |
0.01mA |
0.01mA |
|
| Display resolution |
Voltage |
1V |
1V |
1V |
|
| Current |
0.01mA |
0.01mA |
0.01mA |
|
| Display value accuracy |
Voltage |
≤0.1%+2LSB |
≤0.1%+2LSB |
≤0.1%+2LSB |
|
| Current |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Load regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
|
| Power regulation rate |
Voltage |
≤0.5%+2LSB |
≤0.5%+2LSB |
≤0.5%+2LSB |
|
| Current |
≤1%+2LSB |
≤1%+2LSB |
≤1%+2LSB |
|
| Ripple (RMS) |
Voltage |
≤1‰ |
≤1‰ |
≤1‰ |
|
| SIZE |
520MM (LENGTH)*482MM (WIDTH)*88MM (HEIGHT) |
Audited Supplier 
MAIN FUNCTION DESCRIPTION
){kind=link}
){kind=link}