Idealplusing 960W RS-232/485 Communication DC Power Supply 1200V 0.8A Programmable DC Power Supply with Load-Side Voltage Detection

Product Description

IDEALPLUSING 960W RS-232/485 Communication DC Power Supply 1200V 0.8A Programmable DC Power Supply with Load-Side Voltage Detection

Friendly Reminder

Dear Customer:

The prices shown on this page are for reference only. The final transaction price will be recalculated and quoted by our sales staff based on your actual needs, purchase quantity, and market conditions. The online prices are for your preliminary budget reference only and do not constitute a final transaction commitment. 

Our company always adheres to the principle of integrity and avoids price misrepresentation. Thank you for your understanding and trust.

Product Description

1	Standard 1U half-width size, small volume and light weight, suitable for workbench use and rack mounting.
2	5-digit display is clear and easy to read, with rich information displayed on the LCD screen.
3	Dual encoders for voltage and current adjustment, making operation convenient.
4	Programmable voltage, current, and time output.
5	Built-in 30-step programmable voltage, current, and time output.
6	RS-232/485 interface, supporting Modbus-RTU and SCPI communication protocols.
7	Designed with load-side voltage sensing terminals, enabling accurate reading and precise control of the load-side voltage.

Specification

Specifications	30V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-30V
Model	IPS-DH10-3025	IPS-DH10-3030	IPS-DH10-3040	IPS-DH10-3050
Output current	0-25A	0-30A	0-40A	0-50A
Output power	750W	900W	1200W	1500W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	1mA	1mA	1mA	1mA
Size and weight	W215*H44*L450 (mm) Approximately 2.8 kg
Model	IPS-DH10-3060	IPS-DH10-3080	PS-DH10-30100
Output current	0-60A	80A	100A
Output power	1800W	2400W	3000W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	1mA	1mA	10mA
Size and weight	W430*H44*L450 (mm) Approximately 3.5 kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	1mV
Display method	Display method
Output overvoltage protection	The menu settings include O.V.P. protection; the protection value can be set arbitrarily, and the output will be turned off after protection is applied.
Output overcurrent protection	The menu settings include O.I.P. protection; the protection value can be set arbitrarily, and output will be turned off after protection is enabled.
Over-temperature protection	Built-in OTP protection, with a protection value of 85ºC ±5% (radiator temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

 

Specifications	50V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-50V
Model	IPS-DH10-5015	IPS-DH10-5020	IPS-DH10-5030
Output current	0-15A	0-20A	0-30A
Output power	750W	1000W	1500W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	1mA
Size and weight	W215*H44*L450 (mm) Approximately 2.8 kg
Model	IPS-DH10-5040	IPS-DH10-5050	IPS-DH10-5060
Output current	0-40A	0-50A	0-60A
Output power	2000W	2500W	3000W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	1mA
Size and weight	W430*H44*L450 (mm) Approximately 3.5 kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	1mV
Display method	Broken code screen display
Output overvoltage protection	The menu settings include O.V.P. protection; the protection value can be set arbitrarily, and the output will be turned off after protection is applied.
Output overcurrent protection	The menu settings include O.I.P. protection; the protection value can be set arbitrarily, and output will be turned off after protection is enabled.
Over-temperature protection	Built-in OTP protection, with a protection value of 85ºC ±5% (radiator temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

 

Specifications	60V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-60V
Model	IPS-DH10-6012.5	IPS-DH10-6025
Output current	0-12.5A	0-25A
Output power	750W	1500W
Size and weight	W215*H44*L450 (mm) Approximately 2.8 kg
Model	IPS-DH10-6030	IPS-DH10-6040	IPS-DH10-6050
Output current	0-30A	0-40A	0-50A
Output power	1800W	2400W	3000W
Size and weight	W430*H44*L450 (mm) Approximately 3.5 kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	1mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	1mV
Display method	Broken code screen display
Output overvoltage protection	The menu settings include O.V.P. protection; the protection value can be set arbitrarily, and the output will be turned off after protection is applied.
Output overcurrent protection	The menu settings include O.I.P. protection; the protection value can be set arbitrarily, and output will be turned off after protection is enabled.
Over-temperature protection	Built-in OTP protection, with a protection value of 85ºC ±5% (radiator temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

 

Specifications	100V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-100V
Model	IPS-DH10-1007.5	IPS-DH10-10010	IPS-DH10-10020	IPS-DH10-10030
Output current	0-7.5A	0-10A	0-20A	0-30A
Output power	750W	1000W	2000W	3000W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	0.1mA	1mA	1mA	1mA
Size and weight	W215*H44*L450 Approximately 2.8kg		W430*H44*L450 Approximately 3.5kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	10mV
Display method	Broken code screen display
Output overvoltage protection	The menu settings include O.V.P. protection; the protection value can be set arbitrarily, and the output will be turned off after protection is applied.
Output overcurrent protection	The menu settings include O.I.P. protection; the protection value can be set arbitrarily, and output will be turned off after protection is enabled.
Over-temperature protection	Built-in OTP protection, with a protection value of 85ºC ±5% (radiator temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

 

Specifications	150V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-150V
Model	IPS-DH10-1505	IPS-DH10-15010	IPS-DH10-15015	IPS-DH10-15020
Output current	0-5A	0-10A	0-15A	0-20A
Output power	750W	1500W	2250W	3000W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	0.1mA	1mA	1mA	1mA
Size and weight	W215*H44*L450 Approximately 2.8kg	W430*H44*L450 Approximately 3.5kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	10mV
Display method	Broken code screen display
Output overvoltage protection	The menu settings include O.V.P. protection; the protection value can be set arbitrarily, and the output will be turned off after protection is applied.
Output overcurrent protection	The menu settings include O.I.P. protection; the protection value can be set arbitrarily, and output will be turned off after protection is enabled.
Over-temperature protection	Built-in OTP protection, with a protection value of 85ºC ±5% (radiator temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

 

Specifications	200V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-200V
Model	IPS-DH10-2004	IPS-DH10-2005	IPS-DH10-2008
Output current	0-4A	0-5A	0-8A
Output power	800W	1000W	1600W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	1mA
Size and weight	W215*H44*L450 (mm) Approximately 2.8 kg
Model	IPS-DH10-20010	IPS-DH10-20015
Output current	0-10A	0-15A
Output power	2000W	3000W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	10mA
Size and weight	W430*H44*L450 (mm) Approximately 3.5 kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	10mV
Display method	Broken code screen display
Output overvoltage protection	The menu settings include O.V.P. protection; the protection value can be set arbitrarily, and the output will be turned off after protection is applied.
Output overcurrent protection	The menu settings include O.I.P. protection; the protection value can be set arbitrarily, and output will be turned off after protection is enabled.
Over-temperature protection	Built-in OTP protection, with a protection value of 85ºC ±5% (radiator temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

 

Specifications	300V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-300V
Model	IPS-DH10-3002	IPS-DH10-3003	IPS-DH10-3004
Output current	0-2A	0-3A	0-4A
Output power	600W	900W	1200W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	0.1mA
Size and weight	W215*H44*L450 (mm) Approximately 2.8 kg
Model	IPS-DH10-3005	IPS-DH10-3008	IPS-DH10-30010
Output current	0-5A	0-8A	0-10A
Output power	1500W	2400W	3000W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	0.1mA		1mA
Size and weight	W215*H44*L450(mm) Approximately 2.8 kg	W430*H44*L450 (mm) Approximately 3.5 kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	10mV
Display method	Segmented display monitor
Output overvoltage protection	The menu allows setting OVP (Over-Voltage Protection), with the protection value being freely adjustable. The output will be shut off after protection is triggered.
Output overcurrent protection	The menu allows you to set O.I.P. protection, with the protection value being freely adjustable. After protection is triggered, the output will be shut off.
Over-temperature protection	Built-in OTP (Over-Temperature Protection), with a protection value of 85ºC ± 5% (heatsink temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

 

Specifications	500V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-500V
Model	IPS-DH10-5001	IPS-DH10-5002	IPS-DH10-5003
Output current	0-1A	0-2A	0-3A
Output power	500W	1000W	1500W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	0.1mA
Size and weight	W215*H44*L450 (mm) Approximately 2.8 kg
Model	IPS-DH10-5004	IPS-DH10-5005	IPS-DH10-5006
Output current	0-4A	0-5A	0-6A
Output power	2000W	2500W	3000W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	0.1mA
Size and weight	W430*H44*L450 (mm) Approximately 3.5 kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	10mV
Display method	Segmented display monitor
Output overvoltage protection	The menu allows setting OVP (Over-Voltage Protection), with the protection value being freely adjustable. The output will be shut off after protection is triggered.
Output overcurrent protection	The menu allows you to set O.I.P. protection, with the protection value being freely adjustable. After protection is triggered, the output will be shut off.
Over-temperature protection	Built-in OTP (Over-Temperature Protection), with a protection value of 85ºC ± 5% (heatsink temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

 

Specifications	600V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-600V
Model	IPS-DH10-6001	IPS-DH10-6002
Output current	0-1A	0-2A
Output power	600W	1200W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	0.1mA
Size and weight	W215*H44*L450 (mm) Approximately 2.8 kg
Model	IPS-DH10-6003	IPS-DH10-6004	IPS-DH10-6005
Output current	0-3A	0-4A	0-5A
Output power	1800W	2400W	3000W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	0.1mA
Size and weight	W430*H44*L450 (mm) Approximately 3.5 kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	10mV
Display method	Segmented display monitor
Output overvoltage protection	The menu allows setting OVP (Over-Voltage Protection), with the protection value being freely adjustable. The output will be shut off after protection is triggered.
Output overcurrent protection	The menu allows you to set O.I.P. protection, with the protection value being freely adjustable. After protection is triggered, the output will be shut off.
Over-temperature protection	Built-in OTP (Over-Temperature Protection), with a protection value of 85ºC ± 5% (heatsink temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

      

Specifications	800V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-800V
Model	IPS-DH10-8001	IPS-DH10-8002	IPS-DH10-8003	IPS-DH10-8004
Output current	0-1A	0-2A	0-3A	0-4A
Output power	800W	1600W	2400W	3200W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	0.1mA
Size and weight	W430*H44*L450 (mm),Approximately 3.5 kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	10mV
Display method	Segmented display monitor
Output overvoltage protection	The menu allows setting OVP (Over-Voltage Protection), with the protection value being freely adjustable. The output will be shut off after protection is triggered.
Output overcurrent protection	The menu allows you to set O.I.P. protection, with the protection value being freely adjustable. After protection is triggered, the output will be shut off.
Over-temperature protection	Built-in OTP (Over-Temperature Protection), with a protection value of 85ºC ± 5% (heatsink temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

 

Specifications	1000V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-1000V
Model	IPS-DH10-10000.5	IPS-DH10-10001	IPS-DH10-10002	IPS-DH10-10003
Output current	0-0.5A	0-1A	0-2A	0-3A
Output power	500W	1000W	2000W	3000W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	0.01mA	0.1mA	0.1mA	0.1mA
Size and weight	W430*H44*L450 Approximately 3.5kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	100mV
Display method	Segmented display monitor
Output overvoltage protection	The menu allows setting OVP (Over-Voltage Protection), with the protection value being freely adjustable. The output will be shut off after protection is triggered.
Output overcurrent protection	The menu allows you to set O.I.P. protection, with the protection value being freely adjustable. After protection is triggered, the output will be shut off.
Over-temperature protection	Built-in OTP (Over-Temperature Protection), with a protection value of 85ºC ± 5% (heatsink temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

 

Specifications	1200V output series
AC input	Single-phase 220V±10%
	Frequency 50Hz/60Hz
Output voltage	0-1200V
Model	IPS-DH10-12000.5	IPS-DH10-12000.8	IPS-DH10-12001	IPS-DH10-12002
Output current	0-0.5A	0-0.8A	0-1A	0-2A
Output power	600W	960W	1200W	2400W
Current readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value)
	0.01mA	0.01mA	0.1mA	0.1mA
Size and weight	W430*H44*L450 Approximately 3.5kg
Power stability	<= 0.1%+10mV
Load stability	<= 0.1%+30mV
Voltage regulation accuracy	<= ±0.1%FS
Steady flow accuracy	<= ±0.1%FS
Ripple (rms)	≤ 0.1%FS+10mV
Voltage setting accuracy	±0.1%FS+10mV
Current setting accuracy	±0.1%FS+10mA
Voltage readback accuracy resolution	5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value).
	100mV
Display method	Segmented display monitor
Output overvoltage protection	The menu allows setting OVP (Over-Voltage Protection), with the protection value being freely adjustable. The output will be shut off after protection is triggered.
Output overcurrent protection	The menu allows you to set O.I.P. protection, with the protection value being freely adjustable. After protection is triggered, the output will be shut off.
Over-temperature protection	Built-in OTP (Over-Temperature Protection), with a protection value of 85ºC ± 5% (heatsink temperature).
Voltage setting	Menu settings, encoder knob input
Current setting	Menu settings, encoder knob input
Communication methods	RS-485/RS-232 (supports Modbus and SCPI protocols)
Function	Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock.
Output polarity	The positive (+) and negative (-) outputs can be grounded arbitrarily.
Heat dissipation method	Forced air cooling
Operating environment	Designed for indoor use, with a temperature range of 0ºC to 40ºC and a humidity range of 10% to 85% RH.
Storage environment	Temperature: -20ºC~ 70ºC ; Humidity: 10% ~ 90% RH
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging.
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times.

Hot selling models

MODEL: IPS-ATDY2075 DC Power Supply 1. AC IN: 1 phase 110/220VAC±15% 50/60HZ 2. DC OUT: 0~20VDC, 0~75A 3. Max power: 1500W	MODEL: IPS-ATDY3050 DC Power Supply 1. AC IN: 1 phase 110/220VAC±15% 50/60HZ 2. DC OUT:0~30VDC, 0~50A 3. Max power: 1500W	MODEL: IPS-ATDY5060 DC Power Supply 1. AC IN: 1 phase 110/220VAC±15% 50/60HZ 2. DC OUT:0~50VDC, 0~60A 3. Max power: 2000W

MODEL: IPS-ATDY4050 DC Power Supply 1. AC IN: 1 phase 110/220VAC±15% 50/60HZ 2. DC OUT:0~40VDC, 0~50A 3. Max power: 2000W	MODEL: ATDY12050 DC Power Supply 1. AC IN: 3-phase 380VAC±15% 50/60HZ 2. DC OUT: 0~120VDC, 0~50A 3. Max power: 6000W	MODEL: IPS-ATDY80100 DC Power Supply 1. AC IN: 3-phase 380VAC±15% 50/60HZ 2. DC OUT: 0~80VDC, 0~100A 3. Max power: 8000W

Detailed Photos

Applications

Model list

No	Model	Voltage (Volt)	Current (Amp)	Power (Watt)	Dimensions (MM)	Weight  (KG)
1	IPS-DH10-3025	0-30V	0-25A	750W	215L*450W*44H	4.5KG/5.5KG
2	IPS-DH10-3030	0-30V	0-30A	900W	215L*450W*44H	4.5KG/5.5KG
3	IPS-DH10-3040	0-30V	0-40A	1200W	215L*450W*44H	4.5KG/5.5KG
4	IPS-DH10-3050	0-30V	0-50A	1500W	215L*450W*44H	4.5KG/5.5KG
5	IPS-DH10-3060	0-30V	0-60A	1800W	430L*450W*44H	8.5KG/9.5KG
6	IPS-DH10-3080	0-30V	0-80A	2400W	430L*450W*44H	8.5KG/9.5KG
7	IPS-DH10-30100	0-30V	0-100A	3000W	430L*450W*44H	8.5KG/9.5KG
8	IPS-DH10-5015	0-50V	0-15A	750W	215L*450W*44H	4.5KG/5.5KG
9	IPS-DH10-5020	0-50V	0-20A	1000W	215L*450W*44H	4.5KG/5.5KG
10	IPS-DH10-5030	0-50V	0-30A	1500W	215L*450W*44H	4.5KG/5.5KG
11	IPS-DH10-5040	0-50V	0-40A	2000W	430L*450W*44H	8.5KG/9.5KG
12	IPS-DH10-5050	0-50V	0-50A	2500W	430L*450W*44H	8.5KG/9.5KG
13	IPS-DH10-5060	0-50V	0-60A	3000W	430L*450W*44H	8.5KG/9.5KG
14	IPS-DH10-6012	0-60V	0-12.5A	750W	215L*450W*44H	4.5KG/5.5KG
15	IPS-DH10-6025	0-60V	0-25A	1500W	215L*450W*44H	4.5KG/5.5KG
16	IPS-DH10-6030	0-60V	0-30A	1800W	430L*450W*44H	4.5KG/5.5KG
17	IPS-DH10-6040	0-60V	0-40A	2400W	430L*450W*44H	8.5KG/9.5KG
18	IPS-DH10-6050	0-60V	0-50A	3000W	430L*450W*44H	8.5KG/9.5KG
19	IPS-DH10-1007	0-100V	0-7.5A	750W	215L*450W*44H	4.5KG/5.5KG
20	IPS-DH10-10010	0-100V	0-10A	1000W	215L*450W*44H	4.5KG/5.5KG
21	IPS-DH10-10020	0-100V	0-20A	2400W	430L*450W*44H	8.5KG/9.5KG
22	IPS-DH10-10030	0-100V	0-30A	3000W	430L*450W*44H	8.5KG/9.5KG
23	IPS-DH10-1505	0-150V	0-5A	750W	215L*450W*44H	4.5KG/5.5KG
24	IPS-DH10-15010	0-150V	0-10A	1500W	215L*450W*44H	4.5KG/5.5KG
25	IPS-DH10-15015	0-150V	0-15A	2250W	430L*450W*44H	8.5KG/9.5KG
26	IPS-DH10-15020	0-150V	0-20A	3000W	430L*450W*44H	8.5KG/9.5KG
27	IPS-DH10-2004	0-200V	0-4A	800W	215L*450W*44H	4.5KG/5.5KG
28	IPS-DH10-2005	0-200V	0-5A	1000W	215L*450W*44H	4.5KG/5.5KG
29	IPS-DH10-2008	0-200V	0-8A	1600W	215L*450W*44H	4.5KG/5.5KG
30	IPS-DH10-20010	0-200V	0-10A	2000W	430L*450W*44H	8.5KG/9.5KG
31	IPS-DH10-20015	0-200V	0-15A	3000W	430L*450W*44H	8.5KG/9.5KG
32	IPS-DH10-3002	0-300V	0-2.5A	750W	215L*450W*44H	4.5KG/5.5KG
33	IPS-DH10-3003	0-300V	0-3A	900W	215L*450W*44H	4.5KG/5.5KG
34	IPS-DH10-3004	0-300V	0-4A	1200W	215L*450W*44H	4.5KG/5.5KG
35	IPS-DH10-3005	0-300V	0-5A	1500W	215L*450W*44H	4.5KG/5.5KG
36	IPS-DH10-3008	0-300V	0-8A	2400W	430L*450W*44H	8.5KG/9.5KG
37	IPS-DH10-30010	0-300V	0-10A	3000W	430L*450W*44H	8.5KG/9.5KG
38	IPS-DH10-5001	0-500V	0-1A	500W	215L*450W*44H	4.5KG/5.5KG
39	IPS-DH10-5002	0-500V	0-2A	1000W	215L*450W*44H	4.5KG/5.5KG
40	IPS-DH10-5003	0-500V	0-3A	1500W	215L*450W*44H	4.5KG/5.5KG
41	IPS-DH10-5004	0-500V	0-4A	2400W	430L*450W*44H	8.5KG/9.5KG
42	IPS-DH10-5005	0-500V	0-5A	2500W	430L*450W*44H	8.5KG/9.5KG
43	IPS-DH10-5006	0-500V	0-6A	3000W	430L*450W*44H	8.5KG/9.5KG
44	IPS-DH10-6001	0-600V	0-1A	600W	215L*450W*44H	4.5KG/5.5KG
56	IPS-DH10-6002	0-600V	0-2A	1200W	215L*450W*44H	4.5KG/5.5KG
46	IPS-DH10-6003	0-600V	0-3A	1800W	430L*450W*44H	8.5KG/9.5KG
47	IPS-DH10-6004	0-600V	0-4A	2400W	430L*450W*44H	8.5KG/9.5KG
48	IPS-DH10-6005	0-600V	0-6A	3000W	430L*450W*44H	8.5KG/9.5KG
49	IPS-DH10-8001	0-800V	0-1A	800W	430L*450W*44H	8.5KG/9.5KG
50	IPS-DH10-8002	0-800V	0-2A	1600W	430L*450W*44H	8.5KG/9.5KG
51	IPS-DH10-8003	0-800V	0-3A	2400W	430L*450W*44H	8.5KG/9.5KG
52	IPS-DH10-8004	0-800V	0-4A	3200W	430L*450W*44H	8.5KG/9.5KG
53	IPS-DH10-1000/05	0-1000V	0-0.5A	500W	430L*450W*44H	8.5KG/9.5KG
54	IPS-DH10-10001	0-1000V	0-1A	1000W	430L*450W*44H	8.5KG/9.5KG
55	IPS-DH10-10002	0-1000V	0-2A	2000W	430L*450W*44H	8.5KG/9.5KG
56	IPS-DH10-10003	0-1000V	0-3A	3000W	430L*450W*44H	8.5KG/9.5KG
57	IPS-DH10-1200/05	0-1200V	0-0.5A	600W	430L*450W*44H	8.5KG/9.5KG
58	IPS-DH10-1200/08	0-1200V	0-0.8A	960W	430L*450W*44H	8.5KG/9.5KG
59	IPS-DH10-12001	0-1200V	0-1A	1200W	430L*450W*44H	8.5KG/9.5KG
60	IPS-DH10-12002	0-1200V	0-2A	2400W	430L*450W*44H	8.5KG/9.5KG

Company Profile